3M 5317 Cable Splicing Kit

45656 MFG #: 5317
$102.91 / EA
Usually Ships within 5-8 Days
  • Cable Type: Non-Shielded
  • Color: Black
  • Conductor Size: 2 to 1/0 AWG, 4 to 1/0 AWG
  • Connector Type: Pigtail
  • Dimensions: 9-1/2 in L
  • Insulation Size: 0.43 to 0.65 in OD
  • Material: EPDM Rubber
  • Number of Conductors: 1
  • Series: 5300
  • Splice Length: 9-1/2
  • Temperature Rating (Degrees F): 90
  • Type: In-Line
  • Voltage Rating: 5/8

3M 5317 Cable Splicing Kit

3M™ Motor Lead Splice Kit, In-Line, Series: 5300, 5/8 kV, Non-Shielded Cable, 2 to 1/0 AWG, 4 to 1/0 AWG Conductor, 0.43 to 0.65 in OD Insulation, 9-1/2 in Splice Length, 1 Conductor, Pigtail Connector, 90 deg C, EPDM Rubber, Black, 9-1/2 in L Dimensions

Additional Description: 3M -5317 (N) MOTOR LEAD SPLICE KT NON-CANCELABLE, NON-RETURNABLE

Catalog Description: 3M™ Motor Lead Inline Splicing Kits 5316-5319 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of inline connections at 1000 volts and less. The splice’s main component, the slip on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal.

  • Specifications
  • Fast and simple installation
  • 1400 psi tensile strength
  • 3/4 in L maximum bolt
  • Polyethylene cable
  • 2 to 1/0 AWG feeder cable, 4 to 1/0 AWG motor lead conductor
  • No torches or heat source required
  • No special tools required to install splice
  • THK walls to resist puncture and abrasion damage
  • High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
  • Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil
  • Suitable for use with 30000 series copper compression lugs or other UL listed copper lugs
  • 365 V mil dielectric strength
  • 750% elongation