3M 5732 Splice Kit

2285458 MFG #: 5732
$187.60 / EA
Usually Ships within 5-8 Days
  • Conductor Size: 2 to 1/0
  • Connector Type: Crimp
  • Insulation Size: 0.95 to 2.4 in OD
  • Number of Conductors: 3
  • Series: 5730
  • Type: 3-Cable Cold Shrink Low Voltage In-Line
  • Voltage Rating: 1000
  • Cable type: Armored Power/Non-Shielded

3M 5732 Splice Kit

3M™ Splice Kit, 3-Cable Cold Shrink Low Voltage In-Line, Series: 5730, 1000 VAC, Armored Power/Non-Shielded Cable, 2 to 1/0 AWG Conductor, 0.95 to 2.4 in OD Insulation, 19 in Splice Length, 3 Conductors, Crimp Connector

Additional Description: 3M -5732 (N) 5732 3/C LV SPLICE KIT NON-CANCELABLE, NON-RETURNABLE

Catalog Description: These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of 3M™ Armorcast Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 0.62–4.00 (16–10• mm). Notes:• Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. • Amount of armorcast needed is based on two half-lapped layers and 15’ rolls.

  • Specifications
  • Cold shrink in-line splice kit is designed for 600 VAC rated armor power cables with aluminum or copper conductors
  • The splice kit requires 1 roll of armor cast™ structural material
  • 1/case