3M 8426-11 Electrical Insulator

2229524 MFG #: 8426-11
$217.20 / EA
Usually Ships within 5-8 Days
  • Color: Black
  • Dielectric Strength: 365
  • Elongation: 7.5
  • Material: EPDM Rubber Insulation
  • Maximum Diameter: 13.9
  • Minimum Diameter: 30.1
  • Series: 8420
  • Tensile Strength: 1400
  • Type: Splice

3M 8426-11 Electrical Insulator

3M™ Cold Shrink Connector Insulator, Splice, Series: 8420, 30.1 mm Diameter Minimum, 13.9 mm Diameter Maximum, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM Rubber Insulation, Black

Additional Description: 3M -8426-11 8426-11 COLD SHRINK INSULATORXP60

Catalog Description: 3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C).The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications.Important: Use insulation jacket or connector O.D. for final ordering criteria.

  • Specifications
  • Simple installation, requires no tools and accommodates a wide range of cable sizes
  • Physical protection and moisture sealing for air insulated connectors and lugs such as spacer cable and lug connections to bus bar
  • Insulation of secondary splices, copper or aluminum conductors
  • Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications
  • Insulation of in-line conductor transition connectors
  • -40 to 194 deg F temperature rating, 1 kV voltage rating
  • UniShield®, wire shield, non-shielded, tape shield cable
  • 11 in relaxed tube length, 7 in max connector length
  • 0.55 min Dia cable for seal, 1.18 in Dia insulator cable or connector covers
  • 2/0 AWG to 250 kcmil conductor size
  • 1 conductor, 250 kcmil, 2/0 AWG, 3/0 AWG, 4/0 AWG conductor size
  • Copper conductor with polyolefin foam
  • No torches or heat required, good thermal stability
  • Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
  • Excellent wet electrical properties
  • Tough rubber formulation withstands backfilling
  • Water-resistant, no mastic or tape required to seal
  • Resists acids, alkali and ozone
  • Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts