3M 8427-12 Cold Shrink Connector Insulator
- Elongation: 7.5
- Maximum Diameter: 16.8
- Minimum Diameter: 35.1
- Series: 8420
- Tensile Strength: 1400
- Type: Splice
- Color: Black
- Dielectric strength: 365
- Material: EPDM Rubber Insulation
3M 8427-12 Cold Shrink Connector Insulator
3M™ Cold Shrink Connector Insulator, Splice, Series: 8420, 35.1 mm Diameter Minimum, 16.8 mm Diameter Maximum, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM Rubber Insulation, Black
Additional Description: 3M -8427-12 COLD SHRINK 8427-12 COLD SHRINK P60
Catalog Description: 3M Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3Ms proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40194°F (-4090°C).The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications.Important: Use insulation jacket or connector O.D. for final ordering criteria.
- Specifications
- Simple installation, requires no tools and accommodates a wide range of cable sizes
- Physical protection and moisture sealing for air insulated connectors and lugs such as spacer cable and lug connections to bus bar
- Insulation of secondary splices, copper or aluminum conductors
- Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications
- Insulation of in-line conductor transition connectors
- -40 to 194 deg F temperature rating, 1 kV voltage rating
- UniShield®, wire shield, non-shielded, tape shield cable
- 12 in relaxed tube length, 8 in max connector length
- 0.67 min Dia cable for seal, 1.38 in Dia insulator cable or connector covers
- 250 to 400 kcmil conductor size
- 1 conductor, 250 kcmil, 400 kcmil, 300 kcmil, 350 kcmil conductor size
- Copper conductor with polyolefin foam
- No torches or heat required, good thermal stability
- Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
- Excellent wet electrical properties
- Tough rubber formulation withstands backfilling
- Water-resistant, no mastic or tape required to seal
- Resists acids, alkali and ozone
- Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts