- Coil Voltage: 24
- Contact Form: 4NO
- Dimensions: 84 mm H x 22.5 mm W x 120 mm D
- Display Type: LED
- Enclosure Type: IP20/IP40
- Power Rating: 1.5
- Series: E1T
- Temperature Rating (Degrees F): -10 to 55
- Terminal Type: Screw
- Mounting type: DIN Rail
ABB 2TLA010030R1000 Expansion Relay
ABB Expansion Relay, Series: E1T, 1.5 W Power, 24 VDC Coil, 4NO Contact Form, DIN Rail Mounting, Screw Terminal, LED Display, IP20/IP40 Enclosure, -10 to 55 deg C, 84 mm H x 22.5 mm W x 120 mm D Dimensions
Additional Description: ABB -2TLA010030R1000 (N) E1T 0,5S EXPANSIONRELAY 24DC NON-CANCELABLE, NON-RETURNABLE
Catalog Description: E1T series expansion relay with 4 safety outputs (off-delayed by 500ms.) for expansion of safety relay, 24V DC supply, 22.5mm wide
- Specifications
- A monitored stop function is achieved by connecting the test output (terminals X1 and X2) to the test or reset input on the safety relay which is being expanded
- 100 Ohm maximum input wire resistance at nominal voltage
- The E1T complies with this requirement
- Single or dual channel operation option
- One condition for a safe delayed stop is that the delay time cannot Increase in the event of a fault
- 22.5 mm width dimension
- LED indication of output
- Quick release connector blocks
- Ag/Au flash contact material
- 5 A gL/gG fuses output
- 6 A gG conditional short-circuit current
- 2.5 kV impulse withstand voltage