- Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100 to 250 VAC and DC), only 4 control voltages ranges covering 24 to 500 V 50/60 Hz and 20 to 500 VDC
- Can manage large control voltage variations
- Allow direct control by PLC output >=24 VDC 500 mA
- Reduced panel energy consumption
- Very distinct closing and opening
- Can withstand short voltage dips and voltage sags
- Built-in surge suppression
- 5.5 kW at 220 to 230 to 240 V, 11 kW at 380 to 400/415/440/500 V, 9 kW at 690 V
- 55 A at 600 V UL/CSA, 1-phase 690 V IEC
ABB AF38Z-40-00-21
ABB IEC Contactor, AC/DC Operated Low Coil Consumption, 24 to 60 VAC, 20 to 60 VDC Coil, 55 A Maximum Load Current, 5.5/9/11 kW Coil, 4 Pole, 50/60 Hz Frequency, 4NO Contact Configuration, Double Connector Connection, Screw Terminal, IP20 Enclosure, -60 to 80 deg C Operating, 86 mm H x 45 mm W x 101 mm D Dimensions
Additional Description: ABB -AF38Z-40-00-21 AF38Z 4P CONTR, 24-60VAC, 20-60VDC
Catalog Description: AF38Z 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. They are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output ? 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 4-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 4 N.O. main