- 3 main poles and 1 built-in auxiliary contact
- They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads
- The ASL.S contactors are the spring terminal version of the ASL range
- The ASL series 1-stack 3-pole contactors are of the block type design
- Control circuit: low consumption (3 W at pull-in and holding) DC operated with solid core magnet
- Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected)
- 7.5 kW 3-phase 400 V IEC, 10 hp at 440 to 480/550 to 600 VAC
- 15.2 A at 220 to 240 VAC 3-phase UL/CSA
ABB ASL16-30-10-81
ABB IEC Contactor, DC Operated, 24 VDC Coil, 15.2 A Maximum Load Current, 7.5 kW, 10 hp Coil, 3 Pole, 3NO Contact Configuration, 1NO Auxiliary Contacts, Cable Clamp Connection, Spring Terminal, IP20 Enclosure, 1000000 Cycles Operating Cycles, -40 to 70 deg C Operating, 2.68 in H x 1.77 in W x 2.85 in D Dimensions
Additional Description: ABB -ASL16-30-10-81 CTR,3P,15.2A,24VDC,1NO
Catalog Description: ASL16 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. The ASL... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available. ASL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.