Honeywell BZ-2RS-A2 Basic Switch
Image Disclaimers Message
Honeywell BZ-2RS-A2 Basic Switch
Honeywell BZ-2RS-A2 Basic Switch
Part #:BZ-2RS-A2
SKU #: 26749
Key Features
Part #:BZ-2RS-A2
SKU #: 26749
Brand: Honeywell
Actuator: Medium Overtravel Plunger
Contact Configuration: SPDT
Dimensions: 2 in L x 0.7 in W x 1 in H
Electrical Ratings: 15 A at 125 VAC
Environmental Conditions: 1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr
- The switchs elongated mounting hole allows for easier, more accurate mounting
- Used in applications where very tight and sensitive control is required between the operate and release points
- -55 to 85 deg C operating temperature
- 2000 V between each terminal and ground dielectric strength, premium large basics SPDT
- 0.5 mm nominal break distance (minimum distance between separated mating contacts in fully open position)
- Silver contacts
- Moving contact rivet construction
- Choice of actuation, termination and operating characteristics
- Accepted world-wide standard "Large Basic" switch
- Low operating force and differential travel
- Bottom facing NO 8 screws and cup washers terminal, recommended for added over travel, for in-line operation and with JR auxiliary actuators
- Plastic material
- 15 A, 125/250/480 VAC, 1/8 hp at 125 VAC, 1/4 hp at 250 VAC, 1/2 A at 125 VDC, 1/4 A at 250 VDC electrical rating
Honeywell BZ-2RS-A2 Basic Switch
Honeywell MICRO SWITCH Basic Switch, Large Premium Standard, Series: BZ Series, 15 A at 125 VAC, 50/60 Hz, SPDT, 1 Pole, Medium Overtravel Plunger, 2.5 to 3.61 N Actuating, Threaded, Screw Terminal, 20000000 Operating Cycles, Phenolic, Environmental Conditions: 1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr, 2 in L x 0.7 in W x 1 in H
Additional Description: HONW-BZ-2RS-A2 (N) LARGE BASIC SWITCH SINGLE POLE NON-CANCELABLE, NON-RETURNABLE