Siemens 5SY4206-6 SenSupplementary Protector

2301503 MFG #: 5SY4206-6
$204.25 / EA
Usually Ships within 5-8 Days
  • Amperage Rating: 6
  • Dimensions: 90 mm H x 36 mm W x 70 mm D
  • Enclosure Type: IP20
  • Frequency Rating: 50
  • Interrupt Rating: 5
  • Number of Poles: 2
  • Temperature Rating (Degrees F): -25 to 45
  • Trip Type: Thermal Magnetic, Thermal/Magnetic
  • Type: Miniature
  • Voltage Rating: 480
  • Wire Size: 14 to 4
  • Connection type: Line/Load/Screw
  • Mounting type: DIN Rail

Siemens 5SY4206-6 SenSupplementary Protector

Siemens Sentron™ Supplementary Protector, Miniature, 480 VAC, 6 A, 50 Hz Frequency, 5 kA Interrupt, Thermal/Magnetic Trip, 2 Pole, Line/Load/Screw Connection, 14 to 4 AWG Wire, IP20 Enclosure, DIN Rail Mounting, -25 to 45 deg C, 90 mm H x 36 mm W x 70 mm D Dimensions

Additional Description: SIEM-5SY4206-6 (N) SUP PTOR 5SY4 2P 480V 6A 5K B-TRIP B NON-CANCELABLE, NON-RETURNABLE

Catalog Description: SUPPLEMENTARY PROTECTOR,2P,6A,CURVE B Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 2 Pole, 6 Amps, 480 VAC, Trip Characteristic Curve B, 36mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2

  • Specifications
  • Excellent current limiting and selectivity characteristics
  • Supports a fast and comfortable removal from the assembly
  • Trip indication
  • Type B characteristic designed for European residential circuit protection, this characteristic can also be used for protection of computers and electronic equipment
  • 35 mm DIN rail mounting
  • Magnetic trip point - 3 to 5 times in rating
  • Thermal trip point - 1.13 to 1.45 protector rating
  • Terminals offer protection against contact with fingers or the back of the hand according to the German accident prevention regulations VBG 4/BGV A2
  • Combined terminals enable a simultaneous connection of busbars and feeder cables
  • Uniform components that can be quickly mounted individually
  • The handle locking device virtually prevents any unauthorized operation of the handle
  • Rapid connection of the feeder cable in front of the busbar
  • Identical terminals at both sides for an optional infeed from the top or the bottom
  • Identical wire screw connections on line and load side
  • No tool required for mounting or dismounting