Siemens 5SY4502-7 SenSupplementary Protector

2270200 MFG #: 5SY4502-7
$178.60 / EA
Usually Ships within 5-8 Days
  • Amperage Rating: 2
  • Dimensions: 90 mm H x 36 mm W x 70 mm D
  • Enclosure Type: IP20
  • Frame: 5SY4
  • Frequency Rating: 50
  • Interrupt Rating: 10
  • Number of Poles: 1+N
  • Temperature Rating (Degrees F): -25 to 45
  • Trip Range: 2.26 to 2.9
  • Trip Type: Thermal Magnetic
  • Type: Miniature
  • Voltage Rating: 480
  • Wire Size: 14 to 4
  • Connection type: Line/Load Side/Screw
  • Mounting type: DIN Rail

Siemens 5SY4502-7 SenSupplementary Protector

Siemens Sentron™ Supplementary Protector, Miniature, 480 VAC, 2 A, 50 Hz Frequency, 10 kA Interrupt, 5SY4 Frame, Thermal/Magnetic Trip, 2.26 to 2.9 A Trip, 1+N Pole, Line/Load Side/Screw Connection, 14 to 4 AWG Wire, IP20 Enclosure, DIN Rail Mounting, -25 to 45 deg C, 90 mm H x 36 mm W x 70 mm D Dimensions

Additional Description: SIEM-5SY4502-7 (N) SUP PTOR 5SY4 1P+N 240V 2A 7.5K C-TRIP NON-CANCELABLE, NON-RETURNABLE PROTECTOR,1P+N,2A,CURVE C

Catalog Description: SUPPLEMENTARY PROTECTOR,1P+N,2A,CURVE C Supplementary Protector, UL1077 Rated, IEC Mini Circuit Breaker, 1+N Pole, 2 Amps, 277 VAC, Trip Characteristic Curve C, 36mm Width, 70mm Depth, UL File E116386 in Vol. 1 Sec. 2

  • Specifications
  • Excellent current limiting and selectivity characteristics
  • Supports a fast and comfortable removal from the assembly
  • Trip indication
  • Type C characteristic is for general device protection in control circuits
  • 35 mm DIN-rail mounting
  • 5 to 10 times magnetic trip point rating
  • 1.13 to 1.45 thermal trip point protector rating
  • Terminals offer protection against contact with fingers or the back of the hand according to the German accident prevention regulations VBG 4/BGV A2
  • Combined terminals enable a simultaneous connection of busbars and feeder cables
  • Uniform components that can be quickly mounted individually
  • The handle locking device virtually prevents any unauthorized operation of the handle
  • Rapid connection of the feeder cable in front of the busbar
  • Identical terminals at both sides for an optional infeed from the top or the bottom
  • Identical wire screw-on line and load side
  • No tool required for mounting or dismounting