Siemens

Siemens 5SY5103-7 SenSupplementary Protector

2223032 MFG #: 5SY5103-7
$183.35 / EA
Usually Ships within 5-8 Days
Siemens 5SY5103-7 SenSupplementary Protector
  • Amperage Rating: 3
  • Dimensions: 90 mm H x 18 mm W x 70 mm D
  • Enclosure Type: IP20
  • Frame: 5SY5
  • Frequency Rating: 50
  • Interrupt Rating: 10
  • Number of Poles: 1
  • Temperature Rating (Degrees F): -25 to 45
  • Trip Range: 3.39 to 4.35
  • Trip Type: Thermal Magnetic
  • Type: Miniature
  • Voltage Rating: 230/400
  • Wire Size: 14 to 4
  • Connection type: Line/Load Side/Screw
  • Mounting type: DIN Rail

Siemens 5SY5103-7 SenSupplementary Protector

Siemens Sentron™ Supplementary Protector, Miniature, 230/400 VAC, 3 A, 50 Hz Frequency, 10 kA Interrupt, 5SY5 Frame, Thermal/Magnetic Trip, 3.39 to 4.35 A Trip, 1 Pole, Line/Load Side/Screw Connection, 14 to 4 AWG Wire, IP20 Enclosure, DIN Rail Mounting, -25 to 45 deg C, 90 mm H x 18 mm W x 70 mm D Dimensions

Additional Description: SIEM-5SY5103-7 SUP PTOR 5SY5 1P IEC 230V 3A 10K C-TRIP C VE C PROTECTOR,1P,3A,CURVE C

Catalog Description: SUPPLEMENTARY PROTECTOR,1P,3A,CURVE C Supplementary Protector, IEC Mini CircuitBreaker, 1 Pole, 3 Amps, 220 VDC, Trip Characteristic Curve C, 18mm Width, 70mmDepth, Not UL

QTY
Add to List
  • Specifications
  • Excellent current limiting and selectivity characteristics
  • Supports a fast and comfortable removal from the assembly
  • Trip indication
  • Type C characteristic is for general device protection in control circuits
  • 35 mm DIN-rail mounting
  • 5 to 10 times magnetic trip point rating
  • 1.13 to 1.45 thermal trip point protector rating
  • Terminals offer protection against contact with fingers or the back of the hand according to the German accident prevention regulations VBG 4/BGV A2
  • Combined terminals enable a simultaneous connection of busbars and feeder cables
  • Uniform components that can be quickly mounted individually
  • The handle locking device virtually prevents any unauthorized operation of the handle
  • Rapid connection of the feeder cable in front of the busbar
  • Identical terminals at both sides for an optional infeed from the top or the bottom
  • Identical wire screw-on line and load side
  • No tool required for mounting or dismounting