Siemens 6SL32101NE245UL0 Power Module
- Amperage Rating: 42 A Input, 45 A Output
- Interface: PM-IF
- Series: PM230
- Size: 419 mm H x 275 mm W x 204 mm D
- Temperature Rating (Degrees F): 32 to 122
- Type: Frame FSD Standard Variant
- Voltage Rating: 380 to 480 VAC Input, 400 VAC Output
- Power supply: 24 VDC, 1 A
Siemens 6SL32101NE245UL0 Power Module
Siemens Power Module, 3-Phase, Series: SINAMICS G120, 380 to 480 VAC Input, 400 VAC Output, 42 A Input Current, 45 A Output, 0.52 kW Power Dissipation, 22 kW Powering Capacity, Specifications: IP20/Open, 0 to 40 deg C, 275 mm W x 204 mm D x 419 mm H
Additional Description: SIEM-6SL32101NE245UL0 (N) SINAMICS PM230-IP20-FSD,U,400V,22KW NON-CANCELABLE, NON-RETURNABLE
Catalog Description: SINAMICS G120 POWER MODULE PM230 UNFILTERED PROTECTION IP20 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD 22KW FOR 110% 60S,100% 240S AMBIENT TEMP 0 TO +40 DEG C(LO) 419 X 275 X 204 (HXWXD), FSD WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU240B/E-2 AND CU230P-2 FIRMWARE-VERSION V4.4 NOTE PM230 DOES NOT SUPPORT SAFETY
- Specifications
- Line harmonics are reduced significantly
- The active power component is very high, i.e. the devices consume less current from the supply for the same drive power
- PM-IF interface for connection of the PM230 power module and control unit
- The PM230 power module also supplies power to the control unit using an integrated power supply
- Motor connection using screw-type terminals or screw studs
- 2-PE/protective conductor connections
- Without control unit and panel approved for CU240B/E-2 and CU230P-2 firmware-version V4