Siemens 6SL32230DE255AG1 Power Module

2324838 MFG #: 6SL32230DE255AG1
$969.04 / EA
Usually Ships within 5-8 Days
  • Amperage Rating: 14 A Input, 13.2 A Output
  • Dimensions: 21.26 in H x 7.09 in W x 9.8 in D
  • Input Voltage: 380 to 480
  • Interface: PM-IF
  • Power Dissipation: 0.18
  • Powering Capacity: 4/5.5 kW at 400 VAC
  • Series: PM230, SINAMICS G120P
  • Size: 540 mm H x 180 mm W x 249 mm D
  • Specifications: 0 to 550 Hz V/F, 47 to 63 Hz Line Frequency, 0.9 Power Factor, 0.97 Efficiency
  • Temperature Rating (Degrees F): 14 to 122
  • Type: Frame FSB Standard Variant
  • Voltage Rating: 380 to 480 VAC Input, 400 VAC Output
  • Input current: 11/14
  • Output current: 10.2/13.2/20.4
  • Output voltage: 400
  • Power supply: 24 VDC, 1 A

Siemens 6SL32230DE255AG1 Power Module

Siemens Power Module, Frame FSB Standard Variant, Series: PM230, 380 to 480 VAC Input, 400 VAC Output, 14 A Input, 13.2 A Output, 24 VDC, 1 A Supply, PM-IF Interface, 14 to 122 deg F, 540 mm H x 180 mm W x 249 mm D Size

Additional Description: SIEM-6SL32230DE255AG1 (N) SINAMICS PM230-IP55-FSB-A-400V 5.5KW NON-CANCELABLE, NON-RETURNABLE

Catalog Description: SINAMICS g120p power module pm230 with built in cl. a filter protection ip55 / ul type12 3AC380-480v +10/-10% 47-63HZ output low overload 5.5KW for 150% 3s.110% 57s.100% 240s ambie. temp -10 to+40 deg c(lo) 540 x 180 x 249 (hxbxt). fsb without control unit and panel approved for cu230p-2 firmware-version v4.3.2

  • Specifications
  • Line harmonics are reduced significantly
  • The active power component is very high, i.e. the devices consume less current from the supply for the same drive power
  • PM-IF interface for connection of the PM230 power module and control unit
  • The PM230 power module also supplies power to the control unit using an integrated power supply
  • Motor connection using screw-type terminals or screw studs
  • 2-PE/protective conductor connections
  • Without control unit and operating unit released for CU230P-2 firmware-version V4.3.2 or higher