WAGO 233-203 Printed Circuit Board Pcb Press Fit Header Connector
2311766
MFG #: 233-203
$1.20
/ EA
Usually Ships within 5-8 Days
- Actuation type: Push-button
- Approvals per: CSA, UL 1059
- Clamping spring material: Chrome nickel spring steel (CrNi)
- Color: Gray
- Conductor connection direction to PCB: 30 °
- Connection technology: CAGE CLAMP®
- Contact material: Electrolytic copper (ECu)
- Contact plating: Tin-plated
- Country of origin: CH
- Customs tariff number: 85369010000
- Depth: 13.9 mm / 0.547 inch
- Drilled hole diameter with tolerance: 1.1 (+0.1) mm
- Fine-stranded conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
- Fine-stranded conductor; with insulated ferrule: 0.25 mm²
- Fine-stranded conductor; with uninsulated ferrule: 0.25 mm²
- Fire load: 0.022 MJ
- Flammability class per UL94: V0
- GTIN: 4045454049430
- Height: 19.5 mm / 0.768 inch
- Height from the surface: 15.5 mm / 0.61 inch
- Insulation material: Polyamide (PA66)
- Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- Limit temperature range: -60 … +105 °C
- Material group: I
- Nominal voltage (II/2): 320 V
- Nominal voltage (III/3): 63 V
- Note (conductor cross-section): Terminating 0.75 mm²/18 AWG conductors is possible; however insulation diameter allows only every other clamping unit to be terminated with this conductor size.
- Number of connection types: 1
- Number of levels: 1
- Number of solder pins per potential: 2
- Packaging type: BOX
- PCB Contact: THT
- Pin spacing: 2.5 mm / 0.098 inch
- Pole No.: 3
- Rated current: 0.25
- Rated current CSA (Use Group B): 0.166666666666667
- Rated current UL (Use Group B): 0.166666666666667
- Rated surge voltage (II/2): 2.5 kV
- Rated surge voltage (III/2): 2.5 kV
- Rated surge voltage (III/3): 2.5 kV
- Rated voltage (III/2): 160 V
- Rated voltage CSA (Use Group B): 150 V
- Rated voltage UL (Use Group B): 150 V
- Ratings per: IEC/EN 60664-1
- Solder pin arrangement: Over the entire terminal strip (in-line)
- Solder pin dimensions: 0.5 x 0.75 mm
- Solder pin length: 4 mm
- Solid conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
- Strip length: 5 … 6 mm / 0.2 … 0.24 inch
- Total number of connection points: 3
- Total number of potentials: 3
- Weight: 1.299 g
- Width: 9.8 mm / 0.386 inch
PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 3-pole; CAGE CLAMP®; 0,50 mm²; gray