WAGO 233-406 Printed Circuit Board Pcb Press Fit Header Connector

2359238 MFG #: 233-406
$1.87 / EA
Usually Ships within 5-8 Days
  • Actuation type: Operating tool
  • Approvals per: CSA, UL 1059
  • Clamping spring material: Chrome nickel spring steel (CrNi)
  • Color: Orange
  • Conductor connection direction to PCB: 30 °
  • Connection technology: CAGE CLAMP®
  • Contact material: Electrolytic copper (ECu)
  • Contact plating: Tin-plated
  • Country of origin: CH
  • Customs tariff number: 85369010000
  • Depth: 12.1 mm / 0.476 inch
  • Drilled hole diameter with tolerance: 1.1 (+0.1) mm
  • Fine-stranded conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Fine-stranded conductor; with insulated ferrule: 0.25 mm²
  • Fine-stranded conductor; with uninsulated ferrule: 0.25 mm²
  • Fire load: 0.034 MJ
  • Flammability class per UL94: V0
  • GTIN: 4045454049973
  • Height: 15.7 mm / 0.618 inch
  • Height from the surface: 11.7 mm / 0.461 inch
  • Insulation material: Polyamide (PA66)
  • Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
  • Limit temperature range: -60 … +105 °C
  • Material group: I
  • Nominal voltage (II/2): 320 V
  • Nominal voltage (III/3): 63 V
  • Note (conductor cross-section): Terminating 0.75 mm²/18 AWG conductors is possible; however insulation diameter allows only every other clamping unit to be terminated with this conductor size.
  • Number of connection types: 1
  • Number of levels: 1
  • Number of solder pins per potential: 2
  • Packaging type: BOX
  • PCB Contact: THT
  • Pin spacing: 2.54 mm / 0.1 inch
  • Pole No.: 6
  • Rated current: 0.25
  • Rated current CSA (Use Group B): 0.166666666666667
  • Rated current UL (Use Group B): 0.166666666666667
  • Rated surge voltage (II/2): 2.5 kV
  • Rated surge voltage (III/2): 2.5 kV
  • Rated surge voltage (III/3): 2.5 kV
  • Rated voltage (III/2): 160 V
  • Rated voltage CSA (Use Group B): 150 V
  • Rated voltage UL (Use Group B): 150 V
  • Ratings per: IEC/EN 60664-1
  • Solder pin arrangement: Over the entire terminal strip (in-line)
  • Solder pin dimensions: 0.5 x 0.75 mm
  • Solder pin length: 4 mm
  • Solid conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Strip length: 5 … 6 mm / 0.2 … 0.24 inch
  • Total number of connection points: 6
  • Total number of potentials: 6
  • Weight: 2.156 g
  • Width: 17.54 mm / 0.691 inch

PCB terminal block; 0.5 mm²; Pin spacing 2.54 mm; 6-pole; CAGE CLAMP®; 0,50 mm²; orange