WAGO 236-102 Printed Circuit Board Pcb Press Fit Header Connector

2167953 MFG #: 236-102
$77.70 / EA
Usually Ships within 5-8 Days
  • Actuation type: Operating tool
  • Approvals per: CSA, UL 1059
  • Clamping spring material: Chrome nickel spring steel (CrNi)
  • Color: Gray
  • Conductor connection direction to PCB: 45 °
  • Connection technology: CAGE CLAMP®
  • Contact material: Electrolytic copper (ECu)
  • Contact plating: Tin-plated
  • Country of origin: CH
  • Customs tariff number: 85369010000
  • Depth: 14 mm / 0.551 inch
  • Drilled hole diameter with tolerance: 1.1 (+0.1) mm
  • Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm²
  • Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1.5 mm²
  • Fire load: 0.028 MJ
  • Flammability class per UL94: V0
  • GTIN: 4044918765909
  • Height: 17 mm / 0.669 inch
  • Height from the surface: 13 mm / 0.512 inch
  • Insulation material: Polyamide (PA66)
  • Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
  • Limit temperature range: -60 … +105 °C
  • Material group: I
  • Nominal voltage (II/2): 630 V
  • Nominal voltage (III/3): 250 V
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Number of connection types: 1
  • Number of levels: 1
  • Number of solder pins per potential: 1
  • Packaging type: BOX
  • PCB Contact: THT
  • Pin spacing: 5/5.08 mm / 0.197/0.2 inch
  • Pole No.: 2
  • Rated current: 24 A
  • Rated current CSA (Use Group B): 15 A
  • Rated current CSA (Use Group D): 0.416666666666667
  • Rated current UL (Use Group B): 15 A
  • Rated current UL (Use Group D): 0.416666666666667
  • Rated surge voltage (II/2): 4 kV
  • Rated surge voltage (III/2): 4 kV
  • Rated surge voltage (III/3): 4 kV
  • Rated voltage (III/2): 320 V
  • Rated voltage CSA (Use Group B): 300 V
  • Rated voltage CSA (Use Group D): 300 V
  • Rated voltage UL (Use Group B): 300 V
  • Rated voltage UL (Use Group D): 300 V
  • Ratings per: IEC/EN 60664-1
  • Solder pin arrangement: Over the entire terminal strip (in-line)
  • Solder pin dimensions: 0.7 x 0.7 mm
  • Solder pin length: 4 mm
  • Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Strip length: 5 … 6 mm / 0.2 … 0.24 inch
  • Total number of connection points: 2
  • Total number of potentials: 2
  • Weight: 1.844 g
  • Width: 12.3 mm / 0.484 inch

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 2-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray