WAGO 264-351 Terminal Strip

1101493 MFG #: 264-351
$1.32 / EA
808 In Stock <strong>Ships Same Day</strong>
  • Amperage Rating: 24
  • Applicable Materials: Steel
  • Cutting Depth: 11-7/8
  • Cutting Direction: Right Hand
  • Cutting Edge Material: HSS
  • Dimensions: 0.87 in H x 0.394 in W x 1.26 in D
  • Drill Diameter Measurement System: Imperial
  • Drill Size - Decimal Inch: 2.625
  • Drill Size - Fraction: 2-5/8
  • Finish: Black Oxide
  • Flute Length: 11-7/8
  • Flute Type: Spiral
  • Overall Length: 19-1/2
  • Point Angle: 118
  • Point Type: Conventional
  • Series: 200
  • Shank Taper Designation: #5 Morse Taper
  • Terminal Type: Through
  • Type: General Purpose Standard
  • Voltage Rating: 800
  • Wire Size: 28 to 12
  • Wire Strip Length: 0.31 to 0.35
  • Actuation type: Operating tool
  • Color: Gray
  • Connectable conductor materials: Copper
  • Connection technology: CAGE CLAMP®
  • Country of origin: CH
  • Customs tariff number: 85369010000
  • Depth: 32 mm / 1.26 inch
  • Design: Horizontal type
  • Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fire load: 0.114 MJ
  • GTIN: 4044918414746
  • Height from the surface: 22.1 mm / 0.87 inch
  • Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • Marking level: Center marking
  • Material: HSS
  • Mounting type: Flanged, Mounting flange
  • Nominal voltage (III/3): 800 V
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Number of levels: 1
  • Packaging type: BOX
  • Rated current: 24 A
  • Rated surge voltage (III/3): 8 kV
  • Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Strip length: 8 … 9 mm / 0.31 … 0.35 inch
  • Total number of connection points: 4
  • Total number of potentials: 1
  • Weight: 6.412 g
  • Width: 10 mm / 0.394 inch
  • Wiring type: Front-entry wiring

4-conductor center terminal block; without push-buttons; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

QTY
  • Specifications
  • High speed steel tools offer a combination of hardness and toughness for wear resistance
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle
  • When run in a counterclockwise direction spiral fluted tools evacuate chips up and out of the cut to reduce clogging