WAGO 2857-533 Programmable Logic Controller Distributed On Machine I/O Subsystem

2308009 MFG #: 2857-533
$306.38 / EA
Usually Ships within 5-8 Days
  • Bounce time (typ.): 8 ms
  • Configurable rise/fall delay time (DO): 0 … 60 s (via software)
  • Configurable rise/fall delay time (relay): 0 … 60 s (via software)
  • Configuration options: DIP switch || WAGO Interface Configuration Software || WAGO Interface Configuration App || WAGO Configuration Display
  • Conformity marking: CE
  • Connection technology: Push-in CAGE CLAMP®
  • Contact material (relay): AgNi + Au
  • Continuous current (DO) (max.): 100 mA (no internal restriction)
  • Country of origin: DE
  • Customs tariff number: 90303370000
  • Depth: 110 mm / 4.331 inch
  • Drop-out time (typ.): 4 ms
  • EMC emission of interference: EN 61000-6-4; EN 61326-2-3; EN 50121-3-2
  • EMC immunity to interference: EN 61000-6-2; EN 61326-2-3; EN 50121-3-2
  • Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
  • Fire load: 0.000 MJ
  • GTIN: 4050821676973
  • Height from upper-edge of DIN-rail: 107 mm / 4.213 inch
  • Hysteresis: Adjustable via DIP switch or software
  • Input range (potentiometer): 0 … 100 kΩ
  • Input range (resistor): 0 … 100 kΩ
  • Input signal type: RTD sensors || Potentiometers || Resistor
  • Insulation type (input/supply/service interface): Basic insulation
  • Limiting continuous current (relay; module assembly): 6 A (≤ 60 °C); 3 A (60 … 70 °C)
  • Line-to-neutral conductor voltage (AC) max.: 300 V
  • Mounting type: DIN-35 rail
  • Nominal supply voltage US: DC 24 V
  • Number of make/switch-on contacts: 1
  • Number of switching thresholds (DO): 1 or 2 (adjustable)
  • Number of switching thresholds (relay): 1 or 2 (adjustable)
  • Overvoltage category: II
  • Packaging type: Bag
  • Pollution degree: 2
  • Power consumption at nominal supply voltage: ≤ 40 mA (+ IDO)
  • Power supply type: 24 VDC
  • Pull-in time (typ.): 8 ms
  • Sensor connection: 2-wire; 3-wire; 4-wire; differential
  • Sensor power supply (RTD) (max.): ≤ 0.5 mA
  • Sensor types (RTD): Pt100 || Pt200 || Pt500 || Pt1000 || Pt5000 || Pt10000 || Pt10 … Pt20000
  • Software filter (adjustable): Moving average value (filter level: 30)
  • Solid conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
  • Standards/Specifications: EN 61010-1; EN 61373
  • Step response (typ.): 60 ms (2-wire); 360 ms (3-wire); 540 ms (4-wire); 360 ms (Potentiometer)
  • Strip length: 9 … 10 mm / 0.35 … 0.39 inch
  • Supply voltage range: ±30 %
  • Surrounding air temperature (operation): -40 … 70 °C
  • Surrounding air temperature (storage): -40 … 85 °C
  • Switching voltage (DO) (max.): Supply voltage (applied): −0.3 V
  • Switching voltage (max.): AC 250 V
  • Temperaturbereich der Anschlussleitung gemäß UL 61010-2-201 min.: 90 °C
  • Temperature coefficient: ≤ 0.01 %/K
  • Temperature range of the connecting cable according to EN 61010-2-201: ≥ (Tsurrounding air + 10 K)
  • Test voltage (input/relay output/supply): 4 kVAC; 60 Hz; 1 min
  • Test voltage (input/service interface): 3 kVAC; 60 Hz; 1 min
  • Test voltage (relay output/service interface): 4 kVAC; 60 Hz; 1 min
  • Test voltage (supply/service interface): 2.5 kVAC; 60 Hz; 1 min
  • Transmission error (max.): ± 1 K
  • WAGO Connector: picoMAX® 5.0
  • Weight: 86.500 g
  • Width: 12.5 mm / 0.492 inch

JUMPFLEX® signal conditioner; RTD threshold value switch; with picoMAX® connector; configurable