WAGO 2857-550 Programmable Logic Controller Distributed On Machine I/O Subsystem

2287969 MFG #: 2857-550
$614.49 / EA
Usually Ships within 5-8 Days
  • Bounce time (typ.): 8 ms
  • Configurable rise/fall delay time (DO): 0 … 60 s (via software)
  • Configurable rise/fall delay time (relay): 0 … 60 s (via software)
  • Configuration options: DIP switch || WAGO Interface Configuration Software || WAGO Interface Configuration App || WAGO Configuration Display
  • Conformity marking: CE
  • Connection technology: Push-in CAGE CLAMP®
  • Contact material (relay): AgNi + Au
  • Continuous current (DO) (max.): 100 mA (no internal restriction)
  • Country of origin: DE
  • Customs tariff number: 85437090300
  • Depth: 105 mm / 4.134 inch
  • Drop-out time (typ.): 4 ms
  • EMC emission of interference: EN 61000-6-4; EN 61326-2-3; EN 50121-3-2
  • EMC immunity to interference: EN 61000-6-2; EN 61326-2-3; EN 50121-3-2
  • Feedthrough for measurement conductor: Ø 9.5 mm
  • Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
  • Fire load: 0.000 MJ
  • Frequency range: 15 … 1000 Hz
  • GTIN: 4050821676997
  • Height from upper-edge of DIN-rail: 107 mm / 4.213 inch
  • Input current (max.): 100 A AC/DC
  • Input signal (current): AC 0.5 … 100 A; DC ±100 A
  • Input signal type: Current
  • Insulation type (analog output/service interface): Basic insulation
  • Insulation type (relay output/supply/analog output and service interface): Reinforced insulation
  • Limit frequency: 3.3 kHz
  • Limiting continuous current (relay; module assembly): 6 A (≤ 60 °C); 3 A (60 … 70 °C)
  • Line-to-neutral conductor voltage (AC) max.: 300 V
  • Load impedance (current output): ≤ 600 Ω
  • Load impedance (voltage output): ≥ 1 kΩ
  • Measurement method: True RMS measurement; Arithmetic mean value
  • Mounting type: DIN-35 rail
  • Nominal supply voltage US: DC 24 V
  • Number of changeover/switchover contacts: 1
  • Number of switching thresholds (DO): 1 or 2 (adjustable)
  • Number of switching thresholds (relay): 1 or 2 (adjustable)
  • Output signal (current): ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
  • Output signal (voltage): ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V
  • Output signal type: Current || Voltage
  • Overvoltage category: II
  • Packaging type: Bag
  • Pollution degree: 2
  • Power consumption at nominal supply voltage: ≤ 50 mA (+ IDO)
  • Power supply type: 24 VDC
  • Prüfspannung (Messkreis/Relaisausgang/Versorgung/Service-Schnittstelle ): 3 kVAC; 50 … 60 Hz; 1 min
  • Pull-in time (typ.): 8 ms
  • Resolution (current): 10 mA
  • Response threshold: 500 mA (AC); 250 mA (DC)
  • Software filter (adjustable): Moving average value (filter level: 30)
  • Solid conductor: 0.2 … 2.5 mm² / 24 … 12 AWG
  • Standards/Specifications: EN 61010-1; EN 61373
  • Step response (typ.): 60 ms (DC; for software filter 3/default setting); 250 ms (AC)
  • Strip length: 9 … 10 mm / 0.35 … 0.39 inch
  • Supply voltage range: ±30 %
  • Surrounding air temperature (operation): -40 … 70 °C
  • Surrounding air temperature (storage): -40 … 85 °C
  • Switching voltage (DO) (max.): Supply voltage (applied): −0.3 V
  • Switching voltage (max.): AC 250 V
  • Temperaturbereich der Anschlussleitung gemäß UL 61010-2-201 min.: 90 °C
  • Temperature coefficient: ≤ 0.01 %/K
  • Temperature range of the connecting cable according to EN 61010-2-201: ≥ (Tsurrounding air + 10 K)
  • Test voltage (analog output/service interface): 2 kVAC; 50 … 60 Hz; 1 min
  • Test voltage (input/output/supply): AC 3 kV; 50 Hz; 1 min
  • Test voltage (measurement circuit/relay output/supply/analog output): 3 kVAC; 50 … 60 Hz; 1 min
  • Transmission error (max.): ≤ 1 % (of the full scale value)
  • WAGO Connector: picoMAX® 5.0
  • Weight: 102.939 g
  • Width: 22.5 mm / 0.886 inch

JUMPFLEX® signal conditioner; through-hole; current; .5 …100 A AC, -100 … 100 A DC; configurable