WAGO 288-895 Programmable Logic Controller Distributed On Machine I/O Subsystem

2356678 MFG #: 288-895
$277.31 / EA
Usually Ships within 5-8 Days
  • Conformity marking: CE
  • Connection technology: CAGE CLAMP®
  • Country of origin: DE
  • Customs tariff number: 85044082900
  • Depth: 85 mm / 3.346 inch
  • Efficiency (typ.): 82 %
  • EMC emission of interference: Per EN 61000-6-3*, *only in connection with 750-641 DALI/DSI Master Module
  • EMC immunity to interference: Per EN 61000-6-2* *only in connection with 750-641 DALI/DSI Master Module
  • Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fire load: 2.223 MJ
  • GTIN: 4045454494889
  • Height from upper-edge of DIN-rail: 25 mm / 0.984 inch
  • Input current Ii: ≤ 0.53 A (19 VDC); ≤ 0.26 A (36 VDC)
  • Input voltage range: DC 19 … 36 V
  • Isolation voltage (AC): AC 0.9 kV
  • Mounting type: DIN-35 rail
  • Nominal input voltage Ui nom: DC 24 V
  • Nominal mains frequency range: 0 Hz
  • Nominal output current Io nom: 0.4 A
  • Nominal output voltage Uo nom: DC 18 V
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Operating altitude (max.): 2000 m
  • Output voltage range: ±2 %
  • Packaging type: BOX
  • Pollution degree: 2
  • Relative humidity: ≤ 85% (non-condensing)
  • Series operation: No
  • Short-circuit-protected: Yes
  • Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Strip length: 5 … 6 mm / 0.2 … 0.24 inch
  • Surrounding air temperature (operation): -25 … 70 °C
  • Surrounding air temperature (storage): -40 … 80 °C
  • WAGO Connector: WAGO 256 Series
  • Weight: 73.400 g
  • Width: 50 mm / 1.969 inch

DC/DC Converter; 24 VDC input voltage; 18 VDC output voltage; 0.4 A output current; 2,50 mm²