WAGO 289-178 Programmable Logic Controller Distributed On Machine I/O Subsystem
2246447
MFG #: 289-178
$63.02
/ EA
Usually Ships within 5-8 Days
- Connection cable: Cat. 5 (min.)
- Connection technology 2: CAGE CLAMP®
- Connection type (1): System
- Connection type 2: System
- Country of origin: DE
- Customs tariff number: 85366990990
- Depth: 85 mm / 3.346 inch
- Design 2: PCB terminal blocks
- Fine-stranded conductor 2: 0.08 … 1.5 mm² / 28 … 14 AWG
- Fire load: 0.000 MJ
- GTIN: 4045454326142
- Height from upper-edge of DIN-rail: 67 mm / 2.638 inch
- Housing design: Mounting carrier
- Insulation resistance: ≥ 500 MΩ
- Mating cycles: 1000
- Mounting type: DIN-35 rail
- Nominal current: 2.1 A
- Operating voltage: ≤ AC 35 V; ≤ DC 50 V
- Packaging type: BOX
- Pluggable connectors: RJ-45 (shielded); with two additional power contacts
- Pole No.: 10
- Pole number 2: 7
- Relative humidity: ≤ 85% (non-condensing)
- Solid conductor 2: 0.08 … 1.5 mm² / 28 … 14 AWG
- Specialty functions: With power jumper contacts || With shield connection || With shield clamping saddle
- Strip length 2: 5 … 6 mm / 0.2 … 0.24 inch
- Surrounding air temperature (operation): -40 … 85 °C (Actuation: −35 … +85 °C)
- Surrounding air temperature (storage): -40 … 85 °C
- Transmission length (max.): 100 m
- WAGO Connector 2: WAGO 739 Series
- WAGO Shield Clamping Saddle: 11 mm wide; cable diameter up to 8 mm
- Weight: 51.732 g
- Width: 30 mm / 1.181 inch
Interface module; RJ-45; with power jumper contacts; PCB terminal blocks; Cat. 5; in mounting carrier; with shield connection; with shield clamping saddle; 1,50 mm²