WAGO 289-449 Programmable Logic Controller Distributed On Machine I/O Subsystem

2236723 MFG #: 289-449
$100.96 / EA
Usually Ships within 5-8 Days
  • Connection technology 2: CAGE CLAMP®
  • Connection type (1): System
  • Connection type 2: Field
  • Contact material (connector): Au over Ni
  • Contact resistance (max.): 30 mΩ
  • Country of origin: DE
  • Customs tariff number: 85366990990
  • Depth: 63.5 mm / 2.5 inch
  • Design 2: PCB terminal blocks (double-row)
  • Fine-stranded conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fire load: 0.087 MJ
  • For mating connector: With solder contact
  • GTIN: 4045454599423
  • Height from upper-edge of DIN-rail: 19 mm / 0.748 inch
  • Housing design: PCB with mounting feet
  • Mating direction: Vertical
  • Mounting type: DIN-35 rail
  • Nominal current: 0.0416666666666667
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Operating voltage: ≤ AC 30 V; ≤ DC 50 V
  • Packaging type: BOX
  • Performance level: 2 / 200 mating cycles
  • Pluggable connectors: D-sub male connector
  • Pole No.: 50
  • Pole number 2: 50
  • Pollution degree: 2
  • Protection type: IP00*
  • Rated surge voltage: 0.8 kV
  • Rated voltage: 50 V
  • Relative humidity: ≤ 85% (non-condensing)
  • Solid conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Strain relief: UNC 4-40 stud bolt
  • Strip length 2: 5 … 6 mm / 0.2 … 0.24 inch
  • Surrounding air temperature (operation): -20 … 50 °C
  • Surrounding air temperature (storage): -40 … 70 °C
  • WAGO Connector 2: WAGO 236 Series
  • Weight: 98.660 g
  • Width: 157 mm / 6.181 inch

Interface module; with solder pin; Male connector; 50-pole; Mating connector with solder connection; Vertical mounting; PCB terminal blocks, double-row; with mounting feet; 2,50 mm²