WAGO 289-458 Programmable Logic Controller Distributed On Machine I/O Subsystem
2257467
MFG #: 289-458
$79.88
/ EA
Usually Ships within 5-8 Days
- Connection technology 2: CAGE CLAMP®
- Connection type (1): System
- Connection type 2: Field
- Contact material (connector): Au over Ni
- Contact resistance (max.): 30 mΩ
- Country of origin: DE
- Customs tariff number: 85366990990
- Depth: 63.5 mm / 2.5 inch
- Design 2: PCB terminal blocks (double-row)
- Fine-stranded conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
- Fire load: 0.000 MJ
- For mating connector: With solder contact
- GTIN: 4045454480479
- Height from upper-edge of DIN-rail: 19 mm / 0.748 inch
- Housing design: PCB with mounting feet
- Mating direction: Vertical
- Mounting type: DIN-35 rail
- Nominal current: 0.0416666666666667
- Note (conductor cross-section): 12 AWG: THHN, THWN
- Operating voltage: ≤ AC 30 V; ≤ DC 50 V
- Packaging type: BOX
- Performance level: 2 / 200 mating cycles
- Pluggable connectors: D-sub female connector
- Pole No.: 37
- Pole number 2: 37
- Pollution degree: 2
- Protection type: IP00*
- Rated surge voltage: 0.8 kV
- Rated voltage: 50 V
- Relative humidity: ≤ 85% (non-condensing)
- Solid conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
- Strain relief: UNC 4-40 stud bolt
- Strip length 2: 5 … 6 mm / 0.2 … 0.24 inch
- Surrounding air temperature (operation): -20 … 50 °C
- Surrounding air temperature (storage): -40 … 70 °C
- WAGO Connector 2: WAGO 236 Series
- Weight: 79.300 g
- Width: 120 mm / 4.724 inch
Interface module; with solder pin; Female connector; 37-pole; Mating connector with solder connection; Vertical mounting; PCB terminal blocks, double-row; with mounting feet; 2,50 mm²