WAGO 289-554 Programmable Logic Controller Distributed On Machine I/O Subsystem

2287667 MFG #: 289-554
$111.57 / EA
Usually Ships within 5-8 Days
  • Connection technology 2: CAGE CLAMP®
  • Connection type (1): System
  • Connection type 2: Field
  • Contact material (connector): Au over Ni
  • Contact resistance (max.): 30 mΩ
  • Country of origin: DE
  • Customs tariff number: 85366990990
  • Depth: 85 mm / 3.346 inch
  • Design 2: PCB terminal blocks (double-row)
  • Fine-stranded conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fire load: 0.000 MJ
  • For mating connector: With IDC
  • GTIN: 4045454409739
  • Height from upper-edge of DIN-rail: 34 mm / 1.339 inch
  • Housing design: Mounting carrier
  • Mating direction: Vertical
  • Mounting type: DIN-35 rail
  • Nominal current: 0.0833333333333333
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Operating altitude (max.): 2000 m
  • Operating voltage: ≤ AC/DC 125 V
  • Packaging type: BOX
  • Performance level: 2 / 200 mating cycles
  • Pluggable connectors: D-sub female connector
  • Pole No.: 50
  • Pole number 2: 50
  • Pollution degree: 2
  • Protection type: IP20
  • Rated surge voltage: 0.8 kV
  • Rated voltage: 125 V
  • Relative humidity: ≤ 85% (non-condensing)
  • Solid conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Standards/Specifications: EN 61010-2-201
  • Strain relief: UNC 4-40 stud bolt
  • Strip length 2: 5 … 6 mm / 0.2 … 0.24 inch
  • Surrounding air temperature (operation): -20 … 50 °C
  • Surrounding air temperature (storage): -40 … 70 °C
  • WAGO Connector 2: WAGO 236 Series
  • Weight: 127.744 g
  • Width: 94 mm / 3.701 inch

Interface module; with solder pin; Female connector; 50-pole; for mating connectors with IDC; Vertical mounting; PCB terminal blocks, double-row; in mounting carrier; 2,50 mm²