WAGO 750-489 Programmable Logic Controller Distributed On Machine I/O Subsystem

2379251 MFG #: 750-489
$1,135.08 / EA
Usually Ships within 5-8 Days
  • Cold junction compensation: Integrated
  • Color: Blue
  • Conformity marking: CE
  • Connection technology: 16 x CAGE CLAMP®
  • Connection type (1): Inputs/outputs
  • Conversion time: ≥10 ms/2 wires (per channel)*; ≥20 ms/3 wires, 4 wires (per channel)*; *for RTD/R; TC/U conversion time depends on module setting
  • Country of origin: DE
  • Customs tariff number: 85389099990
  • Data width: 4 x 16-bit data; 4 x 8-bit control/status (optional)
  • Depth: 67.8 mm / 2.669 inch
  • Depth from upper edge of DIN-rail: 60.6 mm / 2.386 inch
  • EMC emission of interference: Per EN 61000-6-3, marine applications
  • EMC immunity to interference: Per EN 61000-6-2, marine applications
  • Ex guideline: EN IEC 60079-0, -7, -11
  • Exposure to pollutants: Per IEC 60068-2-42 and IEC 60068-2-43
  • Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Fire load: 0.000 MJ
  • GTIN: 4055143948029
  • Height: 100 mm / 3.937 inch
  • Housing material: Polycarbonate, polyamide 6.6
  • Intrinsic safety Ex i: Yes
  • Isolation: Acc. to EN/IEC 60079-11: 300 VAC system/supply; acc. to EN/UL 61010-2-201: 1200 VDC system/supply/channel
  • Marking: ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I
  • Measurement error (25 °C): In delivery state: ±0.2 % of the upper-range value (value achieved during calibration in operating environment 0 ≤ TA ≤ 55 °C); After user calibration: ±0.05 % of the upper-range value (only valid in the thermally stable operating state)
  • Mounting position: Horizontal (standing/lying); vertical
  • Mounting type: DIN-35 rail
  • Number of analog inputs: 4
  • Number of incoming power jumper contacts: 2
  • Number of outgoing power jumper contacts: 2
  • Operating altitude: 0 … 2000 m
  • Packaging type: BOX
  • Pollution degree (5): 2 per IEC 61131-2
  • Power consumption (5 V system supply): 60 mA
  • Power loss Pl: 1,6 W
  • Protection type: IP20
  • Reactances (note): Reactance, if the internal inductance Li or capacitance Ci (without cable) of the connected device ≤ 1 % of the specified values
  • Reactances Ex ia I: Lo = 2.57 H; Co = 1000 µF
  • Reactances Ex ia IIA: Lo = 1.57 H; Co = 1000 μF
  • Reactances Ex ia IIB: Lo = 0.78 H; Co = 1000 µF
  • Reactances Ex ia IIC: Lo = 0.19 H; Co = 100 µF
  • Relative humidity (without condensation): 0.95
  • Resolution (over entire range): 0.1 K of full scale value; 0.01 K of full scale value (restricted to -50 °C …+150 °C)
  • Safety-relevant data (circuit): Uo = 4 V; Io = 13,46 mA; Po = 13,46 mW; Kennlinie: Linear
  • Sensor connection: 4 x (2-wire); RTD/R: 3 wires; 4 wires
  • Shock resistance: 15g per IEC 60068-2-27
  • Signal type: Resistance thermometers || Resistors || Potentiometer positions || Thermocouple || MV sensors
  • Signal type (configurable): Yes
  • Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Strip length: 8 … 9 mm / 0.31 … 0.35 inch
  • Supply voltage (field): DC 24 V; (Ex i power supply: UO = max. 27.3 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)
  • Supply voltage (system): DC 5 V; via data contacts
  • Surrounding air temperature (operation): 0 … 55 °C
  • Surrounding air temperature (storage): -25 … 85 °C
  • Temperature coefficient: ±0.001 %/K of the upper-range value
  • Total number of channels (module): 4
  • Vibration resistance: 4g per IEC 60068-2-6
  • Weight: 99.300 g
  • Width: 24 mm / 0.945 inch

4-channel analog input; for RTD sensors and thermocouples; 16 bits; Diagnostics; Intrinsically safe; blue