WAGO 750-673 Programmable Logic Controller Distributed On Machine I/O Subsystem

2228938 MFG #: 750-673
$933.48 / EA
Usually Ships within 5-8 Days
  • Color: Light gray
  • Conformity marking: CE
  • Connection requirement (permissible cable type): Motor connection: shielded
  • Connection technology: 32 x CAGE CLAMP®
  • Connection type (1): Inputs/outputs
  • Counter depth: 32 bit
  • Country of origin: DE
  • Customs tariff number: 85371091990
  • Data width: 12-byte input/output
  • Depth: 69.8 mm / 2.748 inch
  • Depth from upper edge of DIN-rail: 62.6 mm / 2.465 inch
  • Diagnostics: Overcurrent, short circuit or ground fault, overtemperature, supply voltage monitoring, motor wire break, wrong rotational direction incremental encoder - motor
  • EMC emission of interference: Per EN 61000-6-3
  • EMC immunity to interference: Per EN 61000-6-2
  • Encoder frequency: 1 MHz
  • Exposure to pollutants: Per IEC 60068-2-42 and IEC 60068-2-43
  • Fine-stranded conductor: 0.08 … 1.5 mm² / 28 … 14 AWG
  • Fire load: 0.000 MJ
  • Full-step stepper frequency (max.): 7812 Hz
  • Functions: Positioning, sin²-shaped ramps, setpoint change on the fly, torque control
  • GTIN: 4045454957193
  • Height: 100 mm / 3.937 inch
  • Housing material: Polycarbonate, polyamide 6.6
  • Input current (typ.): 2.8 mA
  • Input filter: 100 µs, software filter can be connected
  • Isolation: 500 V system/field
  • Load type: Resistive load, inductive load (max. 2 H), lamps
  • Load type of switching frequency: Inductive load per IEC 947-5-1, DC 13
  • Mounting position: Horizontal (standing/lying); vertical
  • Mounting type: DIN-35 rail
  • Note (conductor cross-section): 14 AWG: THHN, THWN
  • Number of digital outputs: 2
  • Number of outputs: 1 stepper motor (2 phases)
  • Operating altitude: 0 … 2000 m
  • Output current: Short-circuit-protected
  • Output current (max.) (motor): 2 x 5.0 A (2 x 7.5 A transient)
  • Output current per channel: 0.5 A
  • Packaging type: BOX
  • Permissible H2S contaminant concentration at a relative humidity 75 %: 10 ppm
  • Permissible SO2 contaminant concentration at a relative humidity 75 %: 25 ppm
  • Pollution degree (5): 2 per IEC 61131-2
  • Power consumption (5 V system supply): 70 mA
  • Protection: Short circuit monitoring of motor connections: Winding short circuit and short circuit to 0 V and 24 V 24 V supply: Reverse voltage protection Motor supply: Reverse voltage protection via external fuse
  • Protection type: IP20
  • Quadrature decoder: 4x evaluation
  • Relative humidity (without condensation): 0.95
  • Resolution: 15 bits + 16 bit prescaler; 64 microsteps per full step
  • Sensor supply: 5 VDC, 300 mA, short-circuit-protected
  • Shock resistance: 15g per IEC 60068-2-27
  • Signal voltage: Compatible with RS-485/-422, common GND with motor voltage and control voltage
  • Solid conductor: 0.08 … 1.5 mm² / 28 … 14 AWG
  • Stepper resolution: 23 bits + sign bit
  • Strip length: 5 … 6 mm / 0.2 … 0.24 inch
  • Supply voltage (system): DC 5 V; via data contacts
  • Surrounding air temperature (operation): 0 … 55 °C
  • Surrounding air temperature (storage): -40 … 85 °C
  • Switching frequency (max.): 5 Hz; Inductive load per IEC 947-5-1, DC 13
  • Terminating resistor: Internal 120 Ω
  • Transmitter connection: A, /A, B, /B, C, /C
  • Vibration resistance: Per IEC 60068-2-6
  • Voltage range for signal (0): −3 … +5 VDC
  • Voltage range for signal (1): 15 … 30 VDC
  • Weight: 183.000 g
  • Width: 48 mm / 1.89 inch

Servo Stepper Controller; 70 VDC; 7.5 A; 6 Inputs; 2 Outputs; light gray