WAGO 787-1664/004-1000 Power Supply Unit

2352355 MFG #: 787-1664/004-1000
$303.37 / EA
Usually Ships within 5-8 Days
  • Active current limitation: Yes
  • Conformity marking: CE
  • Connection technology: Push-in CAGE CLAMP®
  • Connection technology 2: CAGE CLAMP®
  • Connection type (1): Input (+)
  • Connection type 2: Input (–); Output; Signaling
  • Country of origin: DE
  • Current limitation: 3.8 A (3.2 A at Uo > 25 VDC); LPS per NEC Class 2
  • Customs tariff number: 85363030888
  • Default setting: DC 3.8 A; switched on
  • Depth from upper edge of DIN-rail: 115.5 mm / 4.547 inch
  • Derating: No derating
  • Efficiency (typ.): 99 %
  • Fine-stranded conductor: 0.5 … 10 mm² / 20 … 8 AWG
  • Fine-stranded conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fire load: 0.000 MJ
  • GTIN: 4055143896467
  • Height: 90 mm / 3.543 inch
  • Input voltage range: DC 20 … 28.8 V
  • Internal fuse: No
  • Isolation voltage (connectors – housing): DC 0.5 kV
  • Mounting type: DIN-35 rail
  • MTBF: > 500,000 h (per IEC 61709)
  • Nominal input voltage Ui nom: DC 24 V
  • Nominal output current Io nom: 4 x 3.8 A (Fixed setting; NEC Class 2 at 20 … 24 VDC); 4 x 3.2 A (NEC Class 2 (at 28 VDC))
  • Nominal output voltage Uo nom: 4 x DC 24 V
  • Operation status indicator: Green LED (channel OK) || Red LED (tripped channel)
  • Output voltage range: DC 20 … 28.8 V (Ue − voltage drop)
  • Packaging type: BOX
  • Parallel operation of single channels: Not permitted
  • Pollution degree: 2
  • Power loss Pl: ≤ 0.82 W (No load); ≤ 3.1 W (4 x 3.8 A)
  • Protection class: III
  • Protection type: IP20 (per EN 60529)
  • Relative humidity: 5 … 96 % (no condensation permissible)
  • Remote input: Reactivation of all tripped channels via 15 … 30 VDC pulse for min. 500 ms || Switching on/off any number of channels via pulse sequence
  • Resistance to reverse feed: ≤ DC 28.8 V
  • Reverse voltage protection: No
  • Series operation: No
  • Signaling: 4 x LED (green/red/orange) || 1 x Remote control input (S1) || 2 x Active signal output (S2; S3)
  • Solid conductor: 0.5 … 10 mm² / 20 … 8 AWG
  • Solid conductor 2: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Standards/Specifications: EN 60950; EN 61000-6-2; EN 61000-6-3; UL 508; UL 2367
  • Strip length: 13 … 15 mm / 0.51 … 0.59 inch
  • Strip length 2: 8 … 9 mm / 0.31 … 0.35 inch
  • Surrounding air temperature (operation): -25 … 70 °C
  • Surrounding air temperature (storage): -25 … 85 °C
  • Switch-on behavior: Time-delayed channel switching (load-dependent, min. 50 ms / max. 5 s)
  • Switch-on capacity: > 65000 µF per channel
  • Total number of channels (module): 4
  • Transient suppression (primary): Suppressor diode (33 V)
  • Voltage drop: ≤ 150 mV (Input (+))
  • WAGO Connector: WAGO 831 Series
  • WAGO Connector 2: WAGO 721 Series
  • Weight: 205.000 g
  • Width: 45 mm / 1.772 inch

WAGO 787-1664/004-1000 Power Supply Unit

Additional Description: WAGO-787-1664/004-1000 ELECTRONIC CIRCUIT BREAKER; 4-CHANNEL; 24 VDC INPUT VOLTAGE; 3.8 A; ACTIVE CURRENT LIMITATION; NEC CLASS 2; COMMUNICATION CAPABILITY 60266630 ACTIVE CURRENT LIMITATION; NEC CLASS 2