WAGO 787-1712 Power Supply Unit

2313264 MFG #: 787-1712
$40.60 / EA
Usually Ships within 5-8 Days
  • Climatic category: 3K3 (per EN 60721)
  • Conformity marking: CE
  • Connection technology: CAGE CLAMP®
  • Connection type (1): Input/output
  • Control deviation: ≤ 1 %
  • Country of origin: CN
  • Customs tariff number: 85044082900
  • Default setting: DC 24 V
  • Depth from upper edge of DIN-rail: 99 mm / 3.898 inch
  • Derating: -4 %/K (> 45 °C)
  • Discharge current: ≤ 1.5 mA
  • Efficiency (typ.): 88 % (230 VAC; 2.5 ADC)
  • Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Fire load: 0.000 MJ
  • GTIN: 4055143372466
  • Height: 90 mm / 3.543 inch
  • Input current Ii: ≤ 0.6 A (230 VAC); ≤ 1.2 A (115 VAC)
  • Input voltage range: AC 90 … 264 V; DC 125 … 375 V
  • Inrush current: ≤ 18 A
  • Internal fuse: F 2 A / 250 VAC
  • Isolation voltage (Pri.-GND): DC 2.2 kV
  • Isolation voltage (Pri.-Sec.): DC 4.242 kV
  • Isolation voltage (Sec.-GND): DC 0.7 kV
  • Mains failure hold-up time: ≥ 10 ms (230 VAC)
  • Mounting type: DIN-35 rail || Screw mount
  • MTBF: > 300,000 h (per IEC 61709)
  • Nominal input voltage Ui nom: AC 100 … 240 V
  • Nominal mains frequency range: 47 … 63 Hz; 0 Hz
  • Nominal output current Io nom: 2.5 A (24 VDC; 110 … 240 VAC); 2 A (24 VDC; 100 … 240 VAC)
  • Nominal output power: 60 W
  • Nominal output voltage Uo nom: DC 24 V (SELV)
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Open-circuit-proof: Yes
  • Operation status indicator: Green LED (Uo)
  • Output voltage range: DC 22 … 26 V (adjustable)
  • Overload behavior: Constant power (in overload range: 1.05 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit
  • Overvoltage category: II
  • Packaging type: BOX
  • Parallel operation: Yes
  • Phases: 1
  • Pollution degree: 2
  • Power factor correction (PFC): Passive
  • Protection class: I
  • Protection type: IP20 (per EN 60529)
  • Recommended backup fusing: Circuit breaker: B6, B10
  • Relative humidity: 10 … 95 % (no condensation permissible)
  • Required backup fusing: An external DC fuse is required for the DC input voltage.
  • Residual ripple: ≤ 200 mV (Peak-to-peak)
  • Resistance to reverse feed: ≤ DC 30 V
  • Series operation: Yes, for 2 devices of the same type
  • Short-circuit-protected: Yes
  • Signaling: 1 x LED DC OK (green)
  • Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Standards/Specifications: EN 61204-3; EN 60335-1; EN 62368-1; UL 60950-1; UL 508
  • Strip length: 6 … 7 mm / 0.24 … 0.28 inch
  • Surrounding air temperature (operation): -20 … 60 °C
  • Surrounding air temperature (storage): -25 … 75 °C
  • Transient suppression (primary): Varistor
  • WAGO Connector: WAGO 236 Series
  • Weight: 300.000 g
  • Width: 40 mm / 1.575 inch

EPSITRON ® ECO power supply; single-phase; 24 VDC; 2.5 A; DIN and chassis mount options