WAGO 787-732 Power Supply Unit

2182461 MFG #: 787-732
$161.22 / EA
Usually Ships within 5-8 Days
  • Climatic category: 3K3 (per EN 60721)
  • Conformity marking: CE
  • Connection technology: CAGE CLAMP®
  • Connection type (1): Input/output
  • Control deviation: ≤ 1 %
  • Country of origin: CN
  • Customs tariff number: 85044082900
  • Default setting: DC 24 V
  • Depth from upper edge of DIN-rail: 136 mm / 5.354 inch
  • Derating: -2.33 %/K (> 40 °C; 230 VAC)
  • Discharge current: ≤ 3.5 mA
  • Efficiency (typ.): 86 % (230 VAC)
  • Fine-stranded conductor: 0.08 … 4 mm² / 28 … 12 AWG
  • Fire load: 10.100 MJ
  • GTIN: 4045454908140
  • Height: 92 mm / 3.622 inch
  • Input current Ii: ≤ 1.5 A (230 VAC); ≤ 3 A (115 VAC)
  • Input voltage range: AC 85 … 264 V; DC 90 … 373 V
  • Inrush current: ≤ 30 A
  • Internal fuse: F 5 A / 250 VAC
  • Isolation voltage (Pri.-GND): DC 2.2 kV
  • Isolation voltage (Pri.-Sec.): DC 4.242 kV
  • Isolation voltage (Sec.-GND): DC 0.7 kV
  • Mains failure hold-up time: ≥ 20 ms (230 VAC)
  • Mounting type: DIN-35 rail
  • MTBF: 480,000 h (per IEC 61709)
  • Nominal input voltage Ui nom: AC 110 … 240 V
  • Nominal mains frequency range: 47 … 63 Hz; 0 Hz
  • Nominal output current Io nom: 10 A (24 VDC)
  • Nominal output power: 240 W
  • Nominal output voltage Uo nom: DC 24 V (SELV)
  • Note (conductor cross-section): 12 AWG: THHN, THWN
  • Open-circuit-proof: Yes
  • Operation status indicator: Green LED (24 VDC OK) || Red LED (overload)
  • Output voltage range: DC 22 … 28 V (adjustable)
  • Overload behavior: Constant power (in overload range: 1.15 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit
  • Overvoltage category: II
  • Packaging type: BOX
  • Parallel operation: Yes
  • Phases: 1
  • Pollution degree: 2
  • Power factor: ≥ 0.94  (230 VAC); ≥ 0.98  (115 VAC)
  • Power factor correction (PFC): Active
  • Power loss (max.) Pl (max.): 53 W (110 VAC / 24 VDC; 11 A)
  • Power loss Pl: ≤ 37.5 W (230 VAC; Nominal load)
  • Protection class: I
  • Protection type: IP20 (per EN 60529)
  • Recommended backup fusing: Circuit breaker: 10 A, 16 A; Tripping characteristic: B or C
  • Relative humidity: ≤ 95% (no condensation permissible)
  • Required backup fusing: An external DC fuse is required for the DC input voltage.
  • Residual ripple: ≤ 100 mV (Peak-to-peak)
  • Resistance to reverse feed: ≤ DC 28 V
  • Series operation: Yes
  • Short-circuit-protected: Yes
  • Signaling: 1 x LED DC OK (green) || 1 x Overload LED (red)
  • Solid conductor: 0.08 … 4 mm² / 28 … 12 AWG
  • Standards/Specifications: EN 62368-1; EN 61204-3; cURus 60950-1; cULus 508; ANSI/ISA 12.12.01 (Class I Div. 2); ATEX; IEC Ex
  • Strip length: 8 … 9 mm / 0.31 … 0.35 inch
  • Surrounding air temperature (operation): -10 … 70 °C
  • Surrounding air temperature (storage): -25 … 85 °C
  • Transient suppression (primary): Varistor
  • WAGO Connector: WAGO 745 Series
  • Weight: 1200.000 g
  • Width: 110 mm / 4.331 inch

WAGO 787-732 Power Supply Unit

Additional Description: WAGO-787-732 (N) NON-CANCELABLE, NON-RETURNABLE SWITCHED-MODE POWER SUPPLY; EPSITRON® ECO POWER; 1-PHASE; 24 VDC OUTPUT VOLTAGE; 10 A OUTPUT CURRENT; 4,00 MM ECONOMY 51291672