WAGO 859-801 DC to DC Converter

2125504 MFG #: 859-801
$74.93 / EA
Usually Ships within 5-8 Days
  • Input Amperage: 0.5
  • Input Voltage: 10 to 30
  • Size: 0.236 in W x 3.583 in D
  • Type: Non-Isolated
  • Color: Gray
  • Conformity marking: CE
  • Connection technology: CAGE CLAMP®
  • Country of origin: US
  • Customs tariff number: 85044082900
  • Depth: 91 mm / 3.583 inch
  • Efficiency (typ.): 70 %
  • Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Fire load: 0.582 MJ
  • GTIN: 4050821021568
  • Height from upper-edge of DIN-rail: 56 mm / 2.205 inch
  • Input voltage range: DC 10 … 30 V
  • Internal fuse: TVS diode
  • Load regulation: ≤ 0.5 %
  • Mains failure hold-up time: ≥ 1 ms
  • Mounting type: Carrier Rail 35 x 15, DIN-35 rail
  • Nominal input voltage Ui nom: DC 24 V
  • Nominal mains frequency range: 0 Hz
  • Nominal output current Io nom: 0.5 A (Single, 10 mm spacing); 0.4 A (in a row)
  • Nominal output voltage Uo nom: DC 5 V
  • Number of jumper slots: 2
  • Operating voltage feedthrough: ≤ 2 %
  • Output voltage: 2
  • Output voltage range: ±2 %
  • Overload behavior: Temporary no damage (short circuit of the output for 1 minute)
  • Packaging type: BOX
  • Pollution degree: 2
  • Protection class: III
  • Protection type: IP20 (per EN 60529)
  • Residual ripple: ≤ 150 mV
  • Reverse voltage protection: Yes
  • Series operation: No
  • Signaling: 1 x LED
  • Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Strip length: 5 … 6 mm / 0.2 … 0.24 inch
  • Surrounding air temperature (operation): 0 … 40 °C
  • Switching frequency: 20 kHz (Nominal)
  • WAGO Connector: WAGO 859 Series
  • Weight: 34.640 g
  • Width: 6 mm / 0.236 inch

WAGO 859-801 DC to DC Converter

WAGO DC to DC Converter, Non-Isolated, 10 to 30 VDC Input, 2 VDC Output, 0.5 A Input, Carrier Rail 35 x 15 Mount, 0.236 in W x 3.583 in D, Gray

Additional Description: WAGO-859-801 DC/DC CONVERTER; 24 VDC INPUT VOLTAGE; 5 VDC OUTPUT VOLTAGE; 0.4 A OUTPUT CURRENT; 2,50 MM ; GRAY 51225851

  • Specifications
  • Front-entry wiring
  • 500 mA single, 10 mm spacing, 400 mA assembly output current
  • 150 mV output noise peak-to-peak max
  • 5 connection point
  • Cage Clamp® connection technology
  • 14 to 28 AWG solid conductor
  • 0.2 to 0.24 strip length
  • 2.205 in height from upper-edge of Din-35 rail
  • 0.582 MJ fire load
  • 5-potentials
  • 70 ppm deg C temperature coefficient
  • 0.5% maximum load regulation, 2% maximum line regulation
  • 40 usec maximum transient recovery time
  • 1 msec maximum hold time
  • 200 kHz nominal switching frequency
  • 70% efficiency at full load
  • TVS diode input fuse