Wattstopper UW-200-W WattStopper Wall Switch Occupancy Sensor

2316829 MFG #: UW-200-W
$102.32 / EA
Usually Ships within 5-8 Days
  • Control Output: Automatic On-Off, Manual On-Off
  • Coverage: 300
  • Dimensions: 2.73 in L x 1.76 in W x 1.83 in H
  • Lamp Type: Fluorescent/Incandescent/LED
  • Power Rating: 0 to 1200 W, 1/6 hp
  • Sensor Type: Ultrasonic
  • Series: UW Series
  • Temperature Rating (Degrees F): 35
  • Time Delay: 5 to 30
  • Type: Dual Relay
  • Viewing Angle: 180
  • Voltage Rating: 120/230/277
  • Color: White
  • Connection type: Flying Lead
  • Material: Plastic
  • Mounting type: Surface

Wattstopper UW-200-W WattStopper Wall Switch Occupancy Sensor

WattStopper® Wall Switch Occupancy Sensor, Dual Relay, Series: UW Series, 120/230/277 VAC, 0 to 1200 W, 1/6 hp Power, Ultrasonic Sensor, 300 sq-ft Coverage, 180 deg Viewing, 5 to 30 min Time Delay, Fluorescent/Incandescent/LED Lamp, Flying Lead Connection, Automatic On/Off, Manual On/Off Control Output, Surface Mounting, 35 deg C, Plastic, White, 2.73 in L x 1.76 in W x 1.83 in H Dimensions

Additional Description: WATT-UW-200-W Ultra WallSwt OccSens 2 Rly 120/277 WHT 2 Relays 120/277V, White

Catalog Description: The UW-200 ultrasonic wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits and a variety of features. (white)

  • Specifications
  • Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
  • LED indicates occupancy detection
  • In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
  • Optional light level sensing with simple setup
  • Service mode allows sensor to operate as a service switch in the unlikely event of a failure
  • Sensor coverage tested to NEMA guide publication WD 7-2000
  • Compatible with decorator wallplates
  • 2-relays for control of two separate lighting loads or circuits
  • Magnetic or electronic ballast load type
  • Can turn lights off/on based on occupancy
  • It contains two relays for controlling two independent lighting loads or circuits
  • Minimum to maximum (trimpot), OFF ultrasonic adjustment
  • 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
  • Complies with 2011 NEC requirements
  • Zero crossing for long relay life
  • Vandal-resistant lens combines precise coverage with durability
  • Selectable walk through mode turns lights off 3 minutes after the room is initially occupied if no motion is detected after the first 30 s
  • Test mode allows quick and easy adjustments
  • Selectable audible alert for impending shutoff