3M 5514A-4/0-AL Splice Kit
- Conductor Size: 4/0
- Connector Type: 20008
- Dimensions: 2-1/2 in Dia
- Insulation Size: 0.84 to 1.38 in OD
- Number of Conductors: 1
- Series: QS-III 5514A
- Splice Length: 29
- Temperature Rating (Degrees F): 105 to 140
- Type: Cold Shrink In-Line
- Voltage Rating: 15
- Cable type: Longitudinally Corrugated/Tape Shield/UniShield®/Wire Shield
- Color: Black
- Material: EPDM/Silicone Rubber
3M 5514A-4/0-AL Splice Kit
3M™ Splice Kit, Cold Shrink In-Line, Series: QS-III 5514A, 15 kV, Longitudinally Corrugated/Tape Shield/UniShield®/Wire Shield Cable, 4/0 AWG Conductor, 0.84 to 1.38 in OD Insulation, 29 in Splice Length, 1 Conductor, 20008 Connector, 105 to 140 deg C, EPDM/Silicone Rubber, Black, 2-1/2 in Dia Dimensions
Additional Description: 3M -5514A-4/0-AL (N) 5514A-4/0-AL QSIII SPLICE KIT NON-CANCELABLE, NON-RETURNABLE
Catalog Description: The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
- Specifications
- In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
- 610% elongation
- 370 V/mil dielectric strength
- 1/case
- Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
- Designed for feeder and distribution circuits, it transitions from shielded to neutral power cables and fits type MV-90 cables
- Silicone rubber splice body provides good high and low temperature performance and the EPDM rubber jacket offers physical protection
- Factory tested partial discharge and AC ensure reliability
- Polyolefin foam, copper conductor
- 0.69 to 1.38 in OD connector
- 5 in aluminum/copper compression length, 5-3/4 in copper compression length, 5-3/4 in shear bolt connector length
- 1090 psi tensile strength