ABB AF26Z-30-00-22 Line Contactor
- Coil Power Rating: 7-1/2 hp, 15 hp, 20 hp, 2 hp, 3 hp
- Coil Voltage: 48 to 130
- Contact Configuration: 3NO
- Contact Rating: 45 A at 690 V
- Dimensions: 45 mm W x 86 mm D x 86 mm H
- Enclosure Type: IP20
- Frequency Rating: 50/60
- Number of Poles: 3
- Operating Cycles: 10000000
- Operating Temperature: -40 to 70
- Series: AFZ
- Size: AF26
- Terminal Type: Screw
- Type: Non-Reversing
- Wattage: 6.5/11/15
ABB AF26Z-30-00-22 Line Contactor
ABB Line Contactor, Non-Reversing, Series: AFZ, 48 to 130 VAC Coil, 45 A Maximum Load Current, 7-1/2 hp, 15 hp, 20 hp, 2 hp, 3 hp Coil, 3 Pole, 50/60 Hz Frequency, 6.5/11/15 kW Wattage, 3NO Contact Configuration, 45 A at 690 V Contact, AF26 Size, Screw Terminal, IP20 Enclosure, 10000000 Cycles Operating Cycles, -40 to 70 deg C Operating, 45 mm W x 86 mm D x 86 mm H Dimensions
Additional Description: ABB -AF26Z-30-00-22 AF26Z 3P CONTR, 48-130VAC/DC NON-CANCELABLE, NON-RETURNABLE
Catalog Description: AF26Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output ? 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and s
- Specifications
- No auxiliary contacts
- 7-1/2 hp at 220 to 240 VAC 3 ph, 15 hp at 440 to 480 VAC 3 ph, 20 hp at 550 to 600 VAC 3 ph, 2 hp at 120 VAC 1 ph, 7-1/2 hp at 200 to 208 VAC 3 ph, 3 hp at 240 VAC 1 ph
- 5.5 kW at 220/230/240 V, 11 kW at 415 V, 11 kW at 440 V, 11 kW at 500 V, 9 kW at 690 V, 11 kW at 400 V
- Control circuit - AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100 to 250 VAC and VDC), only 4 control voltage ranges covering 24 to 500 V 50/60 Hz and 20 to 500 VDC
- Can manage large control voltage variations
- Reduced panel energy consumption
- Very distinct closing and opening
- Built-in surge suppression
- Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories
- 45 A at 690 V, 40 A at 690 V, 32 A at 690 V rated operational current AC-1
- 26 A at 220/230/240 V, 26 A at 380/400 V, 26 A at 415 V, 26 A at 440 V, 23 A at 500 V, 17 A at 690 V rated operational current AC-3