Part #:AF30Z-30-22-23
SKU #: 2309471
Key Features
Part #:AF30Z-30-22-23
SKU #: 2309471
Brand: ABB
Coil Power Rating: 10 hp, 20 hp, 25 hp, 2 hp, 5 hp
Coil Voltage: 100 to 250, 100 to 250 VAC/VDC
Contact Configuration: 3NO
Contact Rating: 50 A at 690 V
Dimensions: 45 mm W x 119.5 mm D x 86 mm H
- Control circuit - AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100 to 250 VAC and VDC), only 4 control voltage ranges covering 24 to 500 V 50/60 Hz and 20 to 500 VDC
- Can manage large control voltage variations
- Reduced panel energy consumption
- Very distinct closing and opening
- Built-in surge suppression
- Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories
- 50 A at 690 V, 42 A at 690 V, 37 A at 690 V rated operational current AC-1
- 33 A at 220/230/240 V, 32 A at 380/400 V, 32 A at 415 V, 32 A at 440 V, 28 A at 500 V, 21 A at 690 V rated operational current AC-3
- 10 hp at 220 to 240 VAC 3 ph, 20 hp at 440 to 480 VAC 3 ph, 25 hp at 550 to 600 VAC 3 ph, 2 hp at 120 VAC 1 ph, 10 hp at 200 to 208 VAC 3 ph, 5 hp at 240 VAC 1 ph
- 9 kW at 220/230/240 V, 15 kW at 380/400 V, 15 kW at 415 V, 18.5 kW at 440 V, 18.5 kW at 500 V, 18.5 kW at 690 V, 15 kW at 400 V
ABB AF30Z-30-22-23 Line Contactor
ABB Line Contactor, Non-Reversing, Series: AFZ, 100 to 250 VAC/VDC Coil, 50 A Maximum Load Current, 10 hp, 20 hp, 25 hp, 2 hp, 5 hp Coil, 3 Pole, 9/15/18.5 kW Wattage, 3NO Contact Configuration, 2NO-2NC Auxiliary Contacts, 50 A at 690 V Contact, AF30Z Size, Screw Terminal, IP20 Enclosure, -60 to 80 deg C Operating, 45 mm W x 119.5 mm D x 86 mm H Dimensions
Additional Description: ABB -AF30Z-30-22-23 CTR,3P,32.2A,LOW100-250VAC/DC,2/2
Catalog Description: AF30Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output ? 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 2-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles with a non-r