Image Disclaimers Message
Appleton WYW080806 Cast Junction Box
Part Number # WYW080806
SKU # 2390473
Appleton WYW080806 Key Features
Appleton WYW080806 Cast Junction Box
Brand: Appleton
Part Number: WYW080806
Appleton Cast Junction Box, Dust-Tight Raintight Watertight, Series: WYW, 8 in Height, 8 in Width, 6 in Depth, NEMA 1/2/3/3R/3S/4/5/6/6P/12/12K/13 NEMA Rating, Gasketed/Hinged/Screw-On Cover, Surface Mounting, Cast Iron, Hot Dipped Galvanized
Additional Description: APLE-WYW080806 CAST IRON JUNCTION BOX
Catalog Description: Cast Junction Box; Height 8 Inch; Width 8 Inch; Depth 6 Inch; Material Cast Iron Body, Neoprene Gasket, Stainless Steel Screw; Finish Hot Dip Galvanized; Enclosure NEMA 1/2/3/3R/3S/4/5/6/6P/12/12K/13; Mounting Surface; Cover Type Hinged, Gasketed Screw-On; Service Type Indoor/Outdoor; Approval UL 50/50E/514A, CSA C22.2; Wall Thickness 0.25 Inch
WYW080806 Application
Indoor/Outdoor ApplicationsWYW080806 Item Features
- These boxes are listed by underwriters laboratories and Canadian Standards Association as type 4
- Neoprene gasket located between cover and box
- Cast metal enclosure means one piece construction, no spot welded seams like those found in formed sheet metal boxes
- Greater mechanical strength
- Thicker walls make them more suitable for drilling and tapping at the factory or in the field
- Cast metal enclosures will provide long life, are inherently corrosion resistant, are able to withstand more mechanical abuse and have the lowest initial cost
- Mounting lugs are provided on all surface mounted boxes, boxes up to 12 x 6 in have two mounting lugs, larger boxes have four mounting lugs, all mounting lugs will be located on the long sides of the box, unless other wise specified
- Raintight boxes are constructed to withstand a beating rain
- Watertight boxes (NEMA Type 4) are constructed to prevent the entry of water under extreme conditions of weather
- Dust-tight boxes are constructed to provide a degree of protection against dust and falling dirt
- Boxes have a post in each corner and allowances must be made for them when conduit entrances are to be located close to a corner
- Wide selection of sizes and locations for drilled and tapped and slip hole conduit entrances
- Hinges are always located on the long side of the box and unless otherwise specified on the right side
- Three rivet anchoring of hinges and bolt/wing nut fasteners
- The hinges are adjusted at the factory for proper gasket pressure but can be readjusted
WYW080806 Standards
Buy American Act Compliant|UL 514A|UL 50|UL 50E File No. E24824|CSA C22.2 No. 18.1|CSA C22.2 No. 94.1|CSA C22.2 No. 94.2|CSA C22.2 No. 25|CSA File No. 020945SKU #2390473Part Number #WYW080806UNSPSC39121332UPC00078138187323