Image Disclaimers Message
Crouse Hinds EDS2129 Snap Switch Control Station
Part Number # EDS2129
SKU # 2250147
Crouse Hinds EDS2129 Key Features
Crouse Hinds EDS2129 Snap Switch Control Station
Brand: Crouse Hinds
Part Number: EDS2129
Crouse-Hinds FlexStation Snap Switch Control Station, 1-Gang Dead End Factory Sealed, Series: EDS, 120/277 VAC, 20 A, 1 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy Iron Alloy, Aluminum Acrylic Painted/Electro-Galvanized, 5-7/8 in L x 3-1/2 in W x 2-11/16 in H Dimensions
Additional Description: CRHD-EDS2129 3/4 CST IRON 1P 20A DIV 1 SNAP SWITCH
Catalog Description: Eaton Crouse-Hinds series EDS snap switch control station, 20A, With switch, With one 3/4" hub, Feraloy iron alloy, 1, Single-gang, Single-pole, 120-277V, Factory sealed, Dead end, Single-pole, 3/4", 120-277 Vac
EDS2129 Application
Industrial Facilities and Factories, Facility, Power Distribution and Control, Industrial Facilities and Factories Facility, Power Distribution and Control Application ApplicationsEDS2129 Item Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Dust ignitionproof, raintight
- To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
- In conjunction with magnetic starters or contactors for remote control of motors
- For manual starting of small AC/DC motors
- To provide manual starting and stopping and motor running protection (with heater)
- 3/4 in hub
EDS2129 Standards
CSA Certified|UL Listed|CSA C22.2|UL 1203SKU #2250147Part Number #EDS2129UNSPSC39122209UPC00782274763750