Image Disclaimers Message
Brand: Honeywell
Honeywell BA-2RQ1-A2 Basic Switch
Part Number # BA-2RQ1-A2
SKU # 26670
$4890.00 / 200Each
Honeywell BA-2RQ1-A2 Key Features
Brand: Honeywell
Part Number # BA-2RQ1-A2
SKU #26670
Actuator: High Overtravel Plunger
Contact Configuration: SPDT
Dimensions: 2 in L x 0.7 in W x 1 in H
Electrical Ratings: 20 A at 250 VAC
Environmental Conditions: 1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr
Frequency Rating: 50/60, 50/60 Hz
Mounting: Threaded
Number of Poles: 1
Operating Cycles: 20000000
Series: BA Series
Terminal Type: Screw
Type: Large Premium Standard
Material: Phenolic
UNSPSC: 39122209
UPC: 00066119113512
$4890.00 / 200Each
Honeywell BA-2RQ1-A2 Basic Switch
Honeywell MICRO SWITCH Basic Switch, Large Premium Standard, Series: BA Series, 20 A at 250 VAC, 50/60 Hz, SPDT, 1 Pole, High Overtravel Plunger, 3.89 to 6.12 N Actuating, Threaded, Screw Terminal, 20000000 Operating Cycles, Phenolic, Environmental Conditions: 1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr, 2 in L x 0.7 in W x 1 in H
Additional Description: HONW-BA-2RQ1-A2 (N) LARGE BASIC SWITCH NON-CANCELABLE, NON-RETURNABLE
BA-2RQ1-A2 Item Features
- The switchs elongated mounting hole allows for easier, more accurate mounting
- Used in applications where very tight and sensitive control is required between the operate and release points
- -55 to 85 deg C operating temperature
- 2000 V between each terminal and ground dielectric strength, premium large basics SPDT
- 0.5 mm nominal break distance (minimum distance between separated mating contacts in fully open position)
- Silver contacts, threaded bushing panel mount O-plunger
- 5.56 mm over travel, 2.78 N release force
- 0.05 mm differential travel, 1.27 mm pretravel
- 0.33 Nm tightening torque, 25.4 mm mounting centers
- Long mechanical life up to 20,000,000 cycles at 95% survival
- Moving contact rivet construction
- Choice of actuation, termination and operating characteristics
- Accepted world-wide standard "Large Basic" switch
- Low operating force and differential travel
- Bottom facing NO 8 screws and cup washers terminal, recommended for upto 20 A load handling
- Plastic material
- 20 A at 125/250/480 VAC, 10 A at 125 VAC "L" (tungsten lamp load), 1 hp at 125 VAC, 2 hp at 250 VAC, 1/2 A, at 25 VDC, 1/4 A at 250 VDC electrical rating
SKU #26670Part Number #BA-2RQ1-A2UNSPSC39122209UPC00066119113512