IDEAL 46-381 Thermo-Shrink Heat Shrinkable Tubing End Cap

2201511 MFG #: 46-381
$519.36 / EA
Usually Ships within 5-8 Days
  • Dimensions: 0.079 in THK
  • Shrink Ratio: 3:1
  • Temperature Rating (Degrees F): -55 to 110
  • Type: Medium Wall
  • Voltage Rating: 600/1000
  • Color: Black
  • Length: 3
  • Material: Cross Linked Polyolefin

IDEAL 46-381 Thermo-Shrink Heat Shrinkable Tubing End Cap

IDEAL® Thermo-Shrink® Heat Shrinkable Tubing End Cap, Medium Wall, 600/1000 VAC, 0.55 in ID Expanded, 0.18 in ID Recovered, -55 to 110 deg C, 3:1 Shrink Ratio, 3 in Length, Cross Linked Polyolefin, Black, 0.079 in THK Dimensions

Additional Description: IDL -46-381 Heat Shrinkable Tube,Ideal,Thermo-Shrink,Medium-Wal l Heat Shrink TUBE,IDEAL,THERMO-SHRINK,MEDIUM-WAL L HEAT SHRINK

Catalog Description: IDEAL, Heat Shrinkable Tube, Thermo-Shrink®, Medium-Wall Heat Shrink, Thickness: 079 IN, Length: 3 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 8 - 1 AWG, Nominal Recoveredi.d. (max.): 0.180 IN, Expanded I.d. (min.): 0.550, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR

  • Specifications
  • Adhesive liner provides complete environmental protection and insulation
  • Shrink temperature of 120 deg C
  • Rated for 600/1000 VAC, 90 deg C continuous use
  • Cable range 8 to 1 AWG
  • Nominal recovered 0.18 in ID (maximum), expanded 0.55 in ID (minimum)
  • Elongation at break ASTM D 638, less than 400%
  • Elongation of break after aging less than 300 PCT 150 deg C, 168 HR
  • Provide watertight seal, resist corrosion, oils and chemicals
  • Creates a watertight seal to protect ends of power and control cords
  • Protects against oxidation, ozone, UV radiation etc
  • Coated with hot melt adhesive to ensure environment seal
  • Fits easily over end of cable protect power cables up to 1000 V and telecommunication cable
  • Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths
  • Thermally stabilized cross linked polyolefin, coated with specially designed hot melt adhesive
  • Protect cable ends during storage