Red Lion 716TX N-Ethernet Switch
Image Disclaimers Message
Red Lion 716TX N-Ethernet Switch
Red Lion 716TX N-Ethernet Switch
Part #:716TX
SKU #: 2245109
Key Features
Part #:716TX
SKU #: 2245109
Brand: Red Lion
Connector Type: 10/100 Base RJ45 TX
Environmental Conditions: 5 to 95% Relative Humidity
Network Type: >/=Cat 5
Port Type: 16 RJ45 Copper
Temperature Rating (Degrees F): -40 to 70, -40 to 70 deg C
- Store-and-forward technology, configurable alarm contact, N-Ring technology with 30ms healing
- Web configuration Ethernet/IP CIP messaging, DHCP server with option 82 relay, option 61, and IP fallback, port mirroring
- ESD and surge protection on all built-in ports
- Internet group management protocol snooping intelligent forwarding and filtering of multicast traffic
- VLAN (Virtual local area network enables switch segmentation allows creation of two or more separate local area network domains
- QoS (quality of service) prioritizes network traffic and improves latency of prioritized Ethernet packets required for ring management, real-time, and other interactive applications
- Trunking (link aggregation)enables multiple physical ports to be linked together and function as one uplink to another identically configured N-Tron switch, increases bandwidth and redundancy to applications requiring high levels of fault tolerant operation
- Port mirroring allows traffic on one port to be duplicated and sent to a designated mirror port, can be used to Monitor Ethernet traffic on the designated source port using the assigned mirror port
- DHCP (DHCP server/client) automates the assignment of IP addresses, option 82 assures that a replacement device on a specific port receives the same IP address as the original
- RSTP (rapid spanning tree protocol) allows configuration in a ring or mesh topology, provides support for redundant path communications with high speed (rapid) healing
- For ease of configuration and monitoring, the 716TX offers web browser management and N-View OLE for process control (OPC) server software
- The N-Tron N-View software can be combined with popular HMI software packages to add network traffic monitoring, trending, and alarming to any application using N-Tron switches
- In addition, SNMP is available for switch link and status monitoring, the alarm contact and status LED can be configured to respond to power failure on power input 1 or input 2, N-Ring broken, partial break high, partial break low, or if multiple ring managers are detected
- Designed to operate in industrial environments
- It is housed in a rugged steel DIN rail enclosure, it has extended industrial specifications and features to meet or exceed the operating parameters of connected equipment
- These include extended temperature ratings extended shock and vibration specs, redundant power inputs and high MTBF (greater than 2M hours)
- The 10/100BaseTX ports are auto sensing and auto configuring each copper port is automatically negotiated for maximum speed and performance by default, but can also be Hard coded through-the user interface
- A high speed processor enables wire speed on all 100BaseTX ports simultaneously
- 8000 MAC addresses, programmable aging time, latency typical is 2.6 us, store and forward switch, redundant input voltage of 10-30 VDC input current of 620 mA at 24 VDC BTU/hr is 50.8 at 24 VDC
- Operating humidity is 5% to 95% (non condensing), operating altitude is 0 to 10000 ft, 200 g at 10ms shock, vibration/seismic of 50 g, 5-200 Hz, triaxial, >2 million hours MTBF
Red Lion 716TX N-Ethernet Switch
redlion N-Tron Ethernet Switch, Managed, 16 RJ45 Copper Port, Network: >/=Cat 5, Duplex/MDIX Auto Sensing Cable, 10/100 Base RJ45 TX Connector, 1.3 A at 24 VDC Supply, DIN Rail Mount, 4.8 in Length, 8.3 in Width, 2.3 in Height, -40 to 70 deg C, Environmental Conditions: 5 to 95% Relative Humidity
Additional Description: REDL-716TX 16 PORT 10/100BASETX, FULLY MANAGED INDUSTRIAL ETHERNET SWITCH, DIN-RAIL, 10-30 VDC MANAGED INDUSTRIAL ETHERNET SWITCH, DIN-RAIL, 10-30 VDC