Part Number # LC1D25LE7
SKU # 642691
LC1D25LE7
Square D LC1D25LE7 Tesys D Iec Contactor
Part Number # LC1D25LE7
SKU # 642691
$198.54 / Each
Square D LC1D25LE7 Key Features
| Brand: | Square D |
|---|---|
| Part Number # : | LC1D25LE7 |
| SKU #: | 642691 |
| Contact Rating: | 25 A at 440 V AC |
| UNSPSC: | 39121529 |
| UPC: | 00785901213215 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$198.54 / Each
Quantity:
- Square D TeSys D IEC Contactor, Series: LC1D, 208 VAC Coil, 25 A Maximum Load Current, 20 hp Coil, 3 Pole, 50/60 Hz Frequency, 3.2/1.25 W Wattage, 3NO Contact Configuration, 1NO-1NC Auxiliary Contacts, 25 A at 440 V AC Contact, Screw Clamp Terminal, Open Enclosure, 15000000 Cycles Operating Cycles, -4 to 140 deg F Operating, Plate/Rail Mounting, 3.35 in H x 1.77 in W x 3.62 in D Dimensions
LC1D25LE7 Application
For resistive and motor loadLC1D25LE7 Item Features
- 6 kV conforming to IEC 60947 rated impulse withstand voltage
- III overvoltage category
- 40 A at <=140 deg F (60 deg C) power circuit/10 A at <=140 deg F (60 deg C) signaling circuit conventional free air thermal current
- 450 A at 440 V power circuit conforming to IEC 60947/140 A AC signaling circuit conforming to IEC 60947-5-1/250 A DC signaling circuit conforming to IEC 60947-5-1 irms rated making capacity
- 450 A at 440 V power circuit conforming to IEC 60947 rated breaking capacity
- 40 A gG at <=690 V coordination type 2 power circuit/63 A gG at <=690 V coordination type 1 power circuit/10 A gG signaling circuit conforming to IEC 60947-5-1 associated fuse rating
- 2 mOhm at 50 Hz - Ith 25 A power circuit average impedance
- 12 to 22 ms closing/4 to 19 ms opening operating time
- 3600 cycles/hr at <=140 deg F (60 deg C) operating rate
- Without built-in suppressor module coil technology
- 2 to 3 W heat dissipation
- 70 VA at 68 deg F (20 deg C) 50/60 Hz inrush power
- 7.5 VA at 68 deg F (20 deg C) 60 Hz/7 VA at 68 deg F (20 deg C) 50 Hz hold-in power consumption
- 25 to 400 Hz signaling circuit frequency
- 5 mA signaling circuit minimum switching current
- 17 V signaling circuit minimum switching voltage
- 1.5 ms on energisation between NC and NO contacts/1.5 ms on de-energisation between NC and NO contacts non-overlap time
- >10 MOhm signaling circuit insulation resistance
- TH protective treatment
- 3 pollution deg
LC1D25LE7 Standards
UL 508|EN 60947-4-1|EN 60947-5-1|IEC 60947-4-1|IEC 60947-5-1|GOST|RINA|DNV|LROS|BV|CCC|GL|CSA C22.2 No 14SKU #642691Part Number #LC1D25LE7UNSPSC39121529UPC00785901213215
Image provided may only be a representation of final product and may include optional equipment