Symcom RM2000 Remote Monitor
Image Disclaimers Message
Symcom RM2000 Remote Monitor
Symcom RM2000 Remote Monitor
Part #:RM2000
SKU #: 2395503
Key Features
Part #:RM2000
SKU #: 2395503
Brand: Littelfuse
Dimensions: 6.1 in W x 1.1 in D x 6.4 in H
Series: RM2000
Specifications: 115 VAC, 4 to 158 deg F Operating
Suitable For Use With: 777 Series 3-ph Current and Voltage Monitor, 77C Series 1-ph Current and Voltage Monitor, 601 Series 3-ph Voltage and Frequency Monitor
Color: Black
- Average current, individual line currents and current unbalance
- Current to ground
- Average voltage, line-line voltages and voltage unbalance
- Instantaneous power
- Power factor
- Last four faults
- All parameters programmed into 777 MotorSaver
- Remaining restart delay times
- Start and stop buttons
- Key lock input to prevent setpoint changes
- Change 777 setpoints from keypad
- Total motor run-time
- Time and date of last four faults, along with voltage and current at time of trip
- Time and date of last 10 motor starts
- Total number of motor restarts
- Minimum time between any two starts with time and date
- Run-time since last start
- kWh consumed
- kVARs consumed
Symcom RM2000 Remote Monitor
Littelfuse Remote Monitor, Series: RM2000, For Use With: 777 Series 3-ph Current and Voltage Monitor, 77C Series 1-ph Current and Voltage Monitor, 601 Series 3-ph Voltage and Frequency Monitor, 115 VAC, 4 to 158 deg F Operating, Polycarbonate, Black, 6.1 in W x 1.1 in D x 6.4 in H
Additional Description: LTFS-RM2000 Rmt mntr 1dev/real-time clock/115V input
Catalog Description: The RM2000 is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the Model 601 voltage monitors, via Modbus protocol with a communications module. The RM-2000/777 motor management system combines unsurpassed electronic motor protection and critical, user-friendly, motor monitoring. The RM2000 has membrane keypad controls which allow both monitoring and control of a 777 relay through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 RM-2000 devices from a PLC, DCS, or SCADA system or a PC with Solutions software installed. The RM2000 will act as a repeater for its motor protector when accessed from the host computer or PLC. In addition to the monitoring functions, the RM2000 can be used to reset a tripped relay. The RM2000 is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and