Brand: Weidmuller
Weidmuller 1469530000 Power Supply Unit
Image Disclaimers Message
Brand: Weidmuller
Weidmuller 1469530000 Power Supply Unit
Brand: Weidmuller
Weidmuller 1469530000 Power Supply Unit
Part #:1469530000
SKU #: 2281200
$161.95/EA
Key Features
Part #:1469530000
SKU #: 2281200
Brand: Weidmuller
Amperage Rating: 5, 5 A
Case Material: Metallic
Frequency Rating: 47/63, 47/63 Hz
Input Voltage: 450 to 800, 450 to 800 VDC
Power Rating: 120, 120 W
$161.95/EA
- 0.3 A at 3 x 500 VAC/0.4 A at 3 x 400 VAC current consumption, 0.2 A at 800 VDC/0.4 A at 450 VDC current consumption
- 0.3 A at 3 x 500 VAC/0.4 A at 3 x 400 VAC current consumption, 0.2 A at 800 VDC/0.4 A at 450 VDC current consumption
- -25 to 70 deg C operating temperature, -40 to 85 deg C storage temperature
- Max 40 A inrush current
- 3 x 400 to 3 x 500 VAC (wide range input) rated input voltage, 2 A/DI, safety fuse 2 to 3 A, Char C, circuit-breaker recommended back-up fuse
- Screw connection method
- 5 A at 55 deg C, 3,75 A at 70 deg C continuous output current at Urated
- <=100 ms ramp-up time, 24 VDC +/- 1% rated output voltage, 5 A at 55 deg C rated (nominal) output current at Unom, <50 mVSS at 24 VDC, IN residual ripple, breaking spikes
- >40 ms at 3 x 500 VAC/>20 ms at 3 x 400 VAC AC failure bridging time at Inom, 87% degree of efficiency, 3.5 mA max earth leakage current, LED green (Uoutput >21.6 VDC), LED yellow (Ioutput >90% IRated type), LED red (overload, over temperature, short circuit, Uoutput <20.4 VDC) indication
- 13 W power loss, nominal load, 30 to 35 VDC protection against reverse voltages from the load, 6 W power loss, idling, IP20 deg protection, >500000 hr to IEC 1709 (SN29500 MTBF, >0.55 at 3 x 500 VAC/>0.65 at 3 x 400 VAC power factor
- 0.5 kV output earth, 2 kV input earth, 3 kV input output Insulation voltage
- 0.5 sq-mm flexible/rigid minimum conductor cross-section, 26 AWG/kcmil minimum conductor cross-section, 6 sq-mm rigid max conductor cross-section, 2.5 sq-mm flexible max wire connection cross-section at input
- 0.5 sq-mm flexible/rigid minimum conductor cross-section, 26 to 12 AWG/kcmil conductor cross-section, 6 sq-mm rigid max conductor cross-section, 2.5 sq-mm flexible max wire connection cross-section at output
- 0.5 to 0.6 Nm tightening torque at input output
- Max 30 VDC/1 A contact load (NO contact)
- Output voltage >21.6 VDC/<20.4 VDC, overload relay ON/OFF
- PRO ECO3 120W 24V 5A type
Specifications
Brand: Weidmuller
Amperage Rating: 5, 5 A
Case Material: Metallic
Frequency Rating: 47/63, 47/63 Hz
Input Voltage: 450 to 800, 450 to 800 VDC
Power Rating: 120, 120 W
Type: Switch Mode
Depth: 3.937, 3.937 in
Height: 4.921, 4.921 in
Mounting type: DIN Rail
Output voltage: 24, 24 VDC
Width: 1.575, 1.575 in
UNSPSC: 39121004
UPC: 04050118275735
Weidmuller 1469530000 Power Supply Unit
Weidmuller Power Supply Unit, Switch Mode, 450 to 800 VDC Input, 24 VDC Output, 120 W, 5 A, 47/63 Hz, DIN Rail Mount, Metallic Case, 1.575 in Width, 3.937 in Depth, 4.921 in Height
Additional Description: WEID-1469530000 PRO ECO3 120W 24V 5A POWER SUPPLY, 120 W, 5 A AT 55 C INPUT 3-Phase Input, 120W/5A 24VDC, (3 x 340...3 x 575 V AC / 2 x 360...2 x 575 V AC)
Catalog Description: Power supply unit for providing DC voltage.
Item Features
Item Features
Resources