Part Number # TGN3325
SKU # 2400771
Image Disclaimers Message
TGN3325
ABB TGN3325 Ge Spec-Setter Safety Switch
Part Number # TGN3325
SKU # 2400771
$0.00 / Each
Typical price:$1470.00 / Each
ABB TGN3325 Key Features
| Brand: | ABB |
|---|---|
| Part Number # : | TGN3325 |
| SKU #: | 2400771 |
| Actuator Type: | Handle |
| Amperage Rating: | 400 A |
| Dimensions: | 21.6 in W x 8.7 in D x 49.44 in H |
| Enclosure Type: | NEMA 1 |
| Finish: | Hot Dipped Galvanized/Powder Coated |
| Frequency Rating: | 50/60 Hz |
| Horsepower: | 100 hp |
| Number of Poles: | 3 |
| Number of Wires: | 3 |
| Phase: | 3, 3 ph |
| Short Circuit Current Rating (kA): | 10 kA |
| Temperature Rating (Degrees F): | 60/75 deg C |
| Terminal Type: | Line/Load Lug |
| Type: | Non-Fused General Duty |
| Material: | Steel |
| Mounting type: | 3-Point/Self-Leveling |
| Manufacturer Name: | ABB |
| UNSPSC: | 39122205 |
| UPC: | 00783164008852 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$0.00 / Each
Typical price:$1470.00 / Each
Quantity:
- GE Spec-Setter Safety Switch, Non-Fused General Duty, 240 V AC, 400 A, 100 hp, 3 ph, 50/60 Hz Frequency, 3 Pole, 3 Wires, 10 kA Short Circuit, Handle Actuator, Class H/J/K/R Insulation, NEMA 1 Enclosure, 3-Point/Self-Leveling Mounting, Line/Load Lug Terminal, 60/75 deg C, 21.6 in W x 8.7 in D x 49.44 in H Dimensions, Steel, Hot Dipped Galvanized/Powder Coated
TGN3325 Application
Residential, Light Commercial, General, Electrical Distribution and Control ApplicationsTGN3325 Item Features
- Integral cover interlock on 30 to 200 A disconnects for added protection
- Highly visible On/Off label takes the guesswork out of safety and gives a clean, modern appearance
- Bright red handle is easy to see and easy to grip
- Direct drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive On/Off indication while prolonging switch life
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- 3-point mounting pattern speeds installation and simplifies ganging in close quarters
- Plated stationary and movable contacts deliver reliability and long life
- Galvanized steel enclosure offers superior rust protection in outdoor applications, theres also a durable polyester powder coated finish
- Plated blades provide visible confirmation of contact position
- Suitable for class H, K, J or R fuses, where applicable
TGN3325 Standards
CSA C22.2 No. 4-04|cUL Listed|Federal Specification W-S-865C|GSA Compliant|NEMA KS1 Rated|Seismic Certified|UL ListedSKU #2400771Part Number #TGN3325UNSPSC39122205UPC00783164008852