Part Number # CR306C002
SKU # 2444225
Image Disclaimers Message
CR306C002
ABB CR306C002
Part Number # CR306C002
SKU # 2444225
$495.10 / Each
Typical price:$936.00 / Each
ABB CR306C002 Key Features
| Brand: | ABB |
|---|---|
| Part Number # : | CR306C002 |
| SKU #: | 2444225 |
| Amperage Rating: | 27 A |
| Coil Voltage: | 110/115 to 120 V AC, 110/115 to 120 VAC |
| Dimensions: | 7 in H x 3.71 in W x 3.94 in D |
| Enclosure Type: | Open |
| Frequency Rating: | 50/60 Hz |
| Number of Poles: | 3 |
| Operating Temperature: | -20 to 70 deg C |
| Overload Relay: | (2) 3 Leg Block Type Bimetal |
| Phase: | 3 |
| Reset Type: | Manual |
| Series: | CR306 |
| Type: | Full Voltage Non-Reversing Non-Combination Magnetic |
| Connection type: | Pressure Screw |
| Manufacturer Name: | ABB |
| UNSPSC: | 39121521 |
| UPC: | 00783166356005 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$495.10 / Each
Typical price:$936.00 / Each
Quantity:
- GE NEMA Starter, Full Voltage Non-Reversing Non-Combination Magnetic, Series: CR306, 600 V AC, 27 A, 50/60 Hz Frequency, 110/115 to 120 VAC Coil, 3 Pole, Manual Reset, 3 ph, Pressure Screw Connection, (2) 3 Leg Block Type Bimetal Overload Relay, Open Enclosure, -20 to 70 deg C Operating, 7 in H x 3.71 in W x 3.94 in D Dimensions
CR306C002 Application
Electrical Distribution and Control ApplicationsCR306C002 Item Features
- Tool less contactor disassembly (sizes 00 to 4) - allows quick access for inspection and maintenance
- Just release two retainers and pull a clip to get at magnet, coil and contacts
- Saddle clamp terminals (sizes 00 to 1) - accommodate ring, spade and stripped wire leads and carry permanent stamped in identification
- Staggered arrangement makes wiring easier and helps prevent shorting between phases
- Current carrying components contact tips are weld-resistant silver cadmium oxide (fine silver on sizes 00 and 0 only)
- Contacts are installed in a wedge configuration for positive make with minimum bounce
- Visual trip indicator with manual reset - to avoid surprise restarts, reset occurs on arm upstroke so a tripped condition cant be overridden by holding the arm down
- Manual weld check provides a convenient test against welding of overload relay contacts, just depress the weld check operator to trip the relay, run a simple continuity test across the relay contacts, then depress the manual reset to return the starter to service
- Dual bimetals - anticipate overloads, responding to rising current and temperature with faster tripping on severe overloads for better motor protection, trip points are factory-calibrated for accuracy
- +/-10% trip adjustment - by turning a dial in the overload relay face allows tuning the protection to the motor on the spot
- Largest selection of modifications and accessory kits includes auxiliary contacts, coils, fifth-pole addition, vertical and horizontal mechanical interlocks, surge suppressors, control circuit fusing, NEMA type enclosures, push buttons, selector switches, indicating lights, control transformers, space heaters and more
- List price includes a holding interlock, pressure terminals for the line and load connections, plus a 3-leg block type overload relay (manual reset)
- All enclosures include external reset
SKU #2444225Part Number #CR306C002UNSPSC39121521UPC00783166356005