Part Number # STBNIP2212
SKU # 972871
Square D STBNIP2212 Key Features
| Brand: | Square D |
|---|---|
| Part Number # : | STBNIP2212 |
| SKU #: | 972871 |
| Dimensions: | 40 mm H x 128.3 mm W x 70 mm D |
| UNSPSC: | 32151601 |
| UPC: | 00785901509448 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
Square D STBNIP2212
Brand: Square D
Part Number: STBNIP2212
Additional Description: SQD -STBNIP2212 (S) ETHERNET MB TCP/IP NIM STD
STBNIP2212 Item Features
- Modicum STB distributed input/output solution range of product
- Transparent ready concept
- 10BASE-T port ethernet
- 1 primary, maximum 6 extension number of segments
- 0 to 256 number of devices per segment
- Industrial LAN structure type
- 0 to 32 per island number of addressable input/output module
- SELV power supply
- Embedded web (configuration, diagnostic and access to variable), bootP/DHCP protocol, Modbus TCP/IP messaging, SNMP agent communication service
- 430 mA for supply circuit input current, 1.2 A, 0.575 A (60 to 70 deg C) nominal output current
- 5.25 VDC (tolerance: +/-0.21%) for logic bus output voltage
- 1 LED red for module error (ERR), green for island state (run), green for power supply (PWR), yellow for test mode, green for 10T, green for status
- Immunity to electromagnetic interference conforming to IEC 61131-2 electromagnetic compatibility
- IP20 conforming to EN 61131-2 class 1, <=2000 m operating altitude
- 0 to 60 deg C without derating, -25 to 70 deg C with derating factor ambient air temperature for operation
- -40 to 85 deg C ambient air temperature for storage
- 95% at 60 deg C without condensation relative humidity
- +/-0.35 mm (f = 10 to 58 Hz), 5 gn (f = 58 to 150 Hz) on 35 x 15 mm symmetrical DIN rail, 3 gn (f = 58 to 150 Hz) on 35 x 7.5 mm symmetrical DIN rail vibration resistance
- 30 gn for 11 ms conforming to IEC 88 reference 2-27 shock resistance
STBNIP2212 Standards
UL Listed|C-Tick, ATEX, CE|CSA Certified|FM ApprovedSKU #972871Part Number #STBNIP2212UNSPSC32151601UPC00785901509448
Image provided may only be a representation of final product and may include optional equipment