ABB AF09Z-30-01-21 IEC Contactor

2282912 MFG #: AF09Z-30-01-21
$49.67 / EA
Usually Ships within 5-8 Days
  • Coil Power Rating: 7-1/2
  • Coil Voltage: 24 to 60 VAC, 20 to 60 VDC
  • Contact Configuration: 3NO
  • Contact Rating: A600/Q600
  • Dimensions: 86 mm H x 45 mm W x 77 mm D
  • Enclosure Type: IP20
  • Frequency Rating: 50/60
  • Maximum Load Current: 25
  • Number of Auxiliary Contacts: 1NC
  • Number of Poles: 3
  • Operating Cycles: 10000000
  • Operating Temperature: -60 to 80
  • Series: AF09Z
  • Size: SZ 09
  • Terminal Type: Screw
  • Type: Low Consumption
  • Wattage: 5.5
  • Contact type: Non-Reversing
  • Mounting type: DIN Rail

ABB AF09Z-30-01-21 IEC Contactor

ABB IEC Contactor, Low Consumption, Series: AF09Z, 24 to 60 VAC, 20 to 60 VDC Coil, 25 A Maximum Load Current, 7-1/2 hp Coil, 3 Pole, 50/60 Hz Frequency, 5.5 kW Wattage, Non-Reversing Contact, 3NO Contact Configuration, 1NC Auxiliary Contacts, A600/Q600 Contact, SZ 09 Size, Screw Terminal, IP20 Enclosure, 10000000 Cycles Operating Cycles, -60 to 80 deg C Operating, DIN Rail Mounting, 86 mm H x 45 mm W x 77 mm D Dimensions

Additional Description: ABB -AF09Z-30-01-21 AF09Z 3P CONTR, 1NC, 24-60VAC, 20-

Catalog Description: AF09Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output ? 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in

  • Specifications
  • Compact, space saving design
  • One coil can be used for different control voltages used worldwide without any coil change
  • AFZ contactors allow direct control by PLC-output 24 VDC 500 mA and obtain a reduced holding coil consumption
  • AFZ contactors withstand short voltage dips and voltage sags (Semi F47-0706 compliance) between 24 to 250 VAC 50/60 Hz
  • AFZ contactors have built-in surge protection and do not require additional surge suppressors
  • The AF series 1-stack 3-pole contactors are of the block type design, main poles and auxiliary contact blocks 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks
  • 600/690 VAC rated insulation voltage
  • 6 kV rated impulse withstand voltage
  • 3000 m maximum operating altitude permissible
  • 2 hp at 200/208 VAC/2 hp at 220/240 VAC/5 hp at 440/480 VAC/7.5 hp at 550/600 VAC 3-phase power rating
  • Reliable in all networks
  • Built-in surge suppression
  • Coil terminal access in the front
  • Easy-to-use accessories
  • Electronic coil type
  • AFZ contactors include an electronic coil interface accepting a wide control voltage Uc minimum to Uc maximum
  • Only four coils cover control voltages between 24 to 250 V 50/60 Hz or 12 to 250 VDC
  • AFZ contactors can manage large control voltage variations