ABB AF52-30-00-13 IEC Contactor
- Coil Power Rating: 22 kW, 40 hp, 50 hp
- Coil Voltage: 100 to 250
- Contact Configuration: 3NO
- Dimensions: 125.5 mm H x 55 mm W x 111 mm D
- Enclosure Type: IP10/IP20
- Frequency Rating: 50/60
- Maximum Load Current: 54
- Number of Poles: 3
- Operating Cycles: 10000000
- Operating Temperature: -60 to 80
- Terminal Type: Screw
- Type: AC/DC Operated
- Connection type: Double Connector
ABB AF52-30-00-13 IEC Contactor
ABB IEC Contactor, AC/DC Operated, 100 to 250 VAC/VDC Coil, 54 A Maximum Load Current, 22 kW, 40 hp, 50 hp Coil, 3 Pole, 50/60 Hz Frequency, 3NO Contact Configuration, Double Connector Connection, Screw Terminal, IP10/IP20 Enclosure, 10000000 Cycles Operating Cycles, -60 to 80 deg C Operating, 125.5 mm H x 55 mm W x 111 mm D Dimensions
Additional Description: ABB -AF52-30-00-13 CTR,3P,54A,100-250VAC/DC,1/1
Catalog Description: AF52 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a
- Specifications
- Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100 to 250 VAC and DC), only 4 control voltages ranges covering 24 to 500 V 50/60 Hz and 20 to 500 VDC
- Can manage large control voltage variations
- Reduced panel energy consumption
- Very distinct closing and opening
- Can withstand short voltage dips and voltage sags
- Built-in surge suppression
- 22 kW at 3-phase 400 V IEC, 40 hp at 440 to 480 VAC, 50 hp at 550 to 600 VAC
- 54 A at 220 to 240 VAC 3-phase UL/CSA