ABB PSE142-600-70 Soft Starter

Brand: ABB

Part Number: PSE142-600-70

ABB Soft Starter, Series: PSE, 208 to 600 VAC, 143 A, 50/60 Hz, 40/75/90 kW Motor, 100 to 250 V AC/24 V DC Coil, 1 to 10 s Start/0 to 20 s Stop Timing, 2 ph Phase, In-Line, Open, 13 to 140 deg F Operating, 219.5 mm L x 130 mm W x 295 mm H

Additional Description: ABB -PSE142-600-70 SOFTSTARTER, 143A, 600V

Catalog Description: The softstarter PSE142-600-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true g