ABB PSE45-600-70 Soft Starter

Brand: ABB

Part Number: PSE45-600-70

ABB Soft Starter, Type PSE Normal Duty, 208 to 600 VAC, 45 A, 50/60 Hz, 22 kW, 40 hp Motor, 100/250 VAC Coil, 1 to 30 s Timing, 2 ph Phase, Screw, Built-In Electronic Overload Relay, IP00, Starting Modes: Normal, -13 to 140 deg F Operating, 245 mm H x 90 mm W x 185.5 mm D

Additional Description: ABB -PSE45-600-70 PSE45, 600V, 100-250VAC 30 HP AT 480V

Catalog Description: The softstarter PSE45-600-70 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true gen