Part Number # EYM50AL
SKU # 2162735
Image Disclaimers Message
EYM50AL
Appleton EYM50AL Conduit Sealing Fitting
Part Number # EYM50AL
SKU # 2162735
$28.25 / Each
Appleton EYM50AL Key Features
| Brand: | Appleton |
|---|---|
| Part Number # : | EYM50AL |
| SKU #: | 2162735 |
| Dimensions: | 4.72 in L x 1.19 in W |
| Finish: | Epoxy Powder Coated |
| Series: | EY Series |
| Size: | 1/2, 1/2 in |
| Suitable For Use With: | IMC/Threaded Rigid Metallic Conduit |
| Type: | Dust-Ignitionproof Explosionproof Raintight |
| Country of origin: | MX |
| Material: | Almag 35 Aluminum |
| Manufacturer Name: | Emerson Electric |
| UNSPSC: | 39121311 |
| UPC: | 00781381600095 |
Buy Now Pay Later
Get 30 days to pay with Net 30 Terms. Apply Now.
$28.25 / Each
Quantity:
- Appleton UNILETS Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof Raintight, Series: EY Series, 1/2 in, For Use With: IMC/Threaded Rigid Metallic Conduit, Almag 35 Aluminum, Epoxy Powder Coated, 4.72 in L x 1.19 in W
EYM50AL Application
For prevent passage of gases, vapors or flames from one portion of conduit system to anotherEYM50AL Item Features
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- 25% fill vertical and horizontal conduit sealing fittings for close turning radius
EYM50AL Standards
UL 886|UL 1203 File No. E10444|CSA C22.2 No. 30|CSA 065181, Class I, Groups A, B, C, D, Class II, Groups E, F, G, Class IIISKU #2162735Part Number #EYM50ALUNSPSC39121311UPC00781381600095